Software
Houzz Logo Print
michie22

Advice needed for drapery rod installation

8 years ago
Hi everyone. I will be installing French return drapery rods to the windows flanking my fireplace. The window walls are not exactly the same, one is 41" and the other is 49".

My question is do I install both rods at the exact same width so that the window areas look the same or do I install the max width for each window? If I install at different widths, would the 8 " difference even be perceivable??

I will be installing the rods 5" below the ceiling. That is in line with the mirror I have above the fireplace.

Attached are pics of the windows.

Please let me know. Thanks

Comments (14)

  • 8 years ago
    last modified: 8 years ago

    can we have another photo straight on of the fireplace, so we can see how it looks 'all at once'?

  • 8 years ago
    Ok, will do when I get home!
  • 8 years ago

    thanks will catch up later.

  • 8 years ago
    last modified: 8 years ago

    You don't measure the walls, you measure the window, including the molding. What widths are the windows? Can't tell from the pics if they're the same size or not.

  • 8 years ago
    @ninigret, I've attached a few photos for a better perspective. I could only get the whole wall if I took a panoramic photo...that warped the wall...but I'm sure you get the idea.

    The two windows are both 28" wide. The only issue with symmetry is the width of the wall. One window wall is 41" and the other 49".

    What is the best way to install the rods to minimize the asymmetry?
  • 8 years ago

    I would hang them the same, to the size of the windows. Hanging one treatment larger will call more attention to the different sizes than the one wall being wider.

    Your eyes tend to go more to the curtains than the wall size IMO.

  • 8 years ago
    last modified: 8 years ago

    odds are, no matter what you size them to, the window or the wall, it will be the same size rod and the same size drapery panels.

    dont do a shirred treatment. have something on rings or drapes with the loops on the back. have small finials, a large one wont fit in the smaller spaces.

    put all the brackets in the same place with regard to the window casing. hang the drapes with one or two rings outside the bracket. adjust the length of the rod to match the window, or match the space. decide which you like the best. you'll be able to do either.

    a light blocking drape will enable you to fudge it all a bit, too. you wont be able to tell how much window is covered by each panel.

    lastly, a drape that doesnt contrast much with the wall will be your best choice. it wont be solid blocks of color floating in different places. but i think thats always the best choice, anyway.

  • PRO
    8 years ago
    last modified: 8 years ago

    IMO you get the same number of panels for each space hang the rod to fit the space and have the drapes stack back to the edge of the window in both cases and I think that should help with the illusion of being the same .I do agree no formal pleats at all

  • 8 years ago

    They're using french rods, so no brackets will be showing and the rod is not adjustable.

  • 8 years ago
    This is the type of rod I'm using. I have no space for finials.
  • 8 years ago
    last modified: 8 years ago

    thats right, i forgot, i remember you saying that yesterday, which is why i didnt give my today's answer yesterday.

    you are making it hard for yourself with your choice as there is no fudge possible. go with low contrast drapes, low contrast rod (nickel rather than brass, for example), measure to the window, and no tears after if it looks off. thats all i can say. seeing it all in today's pic i think it will surely look off if you measure to the walls.

    i hate situations like this and make my choices for optimum fudge possible once they are up. : )

    (i like your rods, i chose similar for my bedroom as i dislike the 'peek around' of a straight drape. for your situation, in angled corner, i just don't see a win with them.)

  • 8 years ago
    last modified: 8 years ago

    adding, do you have room for that return flange in your narrowest space? (right side of the window to the left of the fireplace) looking closer i'm not even certain they'll work for you. you might need something with a narrower flange at the end, more vertical.


  • 8 years ago
    last modified: 8 years ago

    Yes, I have room for the rod flange to sit in the wall space near the corners.

    I think I will install the rod on the smaller window to the maximum width and for the wider window, I will experiment and see if I can increase the width a bit...only if the difference in size is not noticeable!