Software
Houzz Logo Print
webuser_223669198

Ac comes on with fan mode

8 years ago

When I select fan on my thermostat the ac compressor turns on and I get cold air from my vents. There doesn’t seem to be a way to turn on the fan by itself.

Does this indicate that my unit is wired incorrectly somewhere?

Is this normal?

Thanks!


Comments (9)

  • 8 years ago

    Was your thermostat set up and connected to your system by a knowledgeable HVAC technician?

    HU-223669198 thanked Elmer J Fudd
  • 8 years ago
    last modified: 8 years ago

    That is hard to say. I bought the house three years ago. The previous owner took good care of the house. But he did do some work himself and hired some out. (I don’t have his phone number so I can’t check with him who installed it)

    i have not messed with it at all myself.

  • 8 years ago
    last modified: 8 years ago

    "Does this indicate that my unit is wired incorrectly somewhere?"

    How old is the fan unit? Some very old ones don't support fan-only mode. However, I suspect your intuition is correct - improperly wired, in which case you might want to get it checked by someone who knows what they are doing.

    HU-223669198 thanked sktn77a
  • 8 years ago
    last modified: 8 years ago

    Has your equipment been checked in the last three years? Annual "maintenance" is a ripoff but a check by an expert every so often can be worthwhile, especially for stuff that's not particularly new. If you're due, schedule that (this is a good time) and have them check the wiring too.

    HU-223669198 thanked Elmer J Fudd
  • 8 years ago

    Thank you both!

    It is an older unit. The inspection sticker says 2007. It’s a Bryant 90t. I can look it up to see if it supports fan only. But now I will plan to have a qualified expert come out.

    Thanks!

  • 8 years ago

    I live in Michigan, it can get really humid here. When it is cool enough at night we open windows and close them in the morning. Then use the ac as it heats up, cooling down and pulling off moisture.

    I just want the fan to supplement between and circulate stale are when I don’t need the ac, and peace of mind that it works correctly. We do have several fans stationed in bedrooms!

    (The basement dehumidifier is on basically all the time)


    anyway this is my and my wife’s first home: know enough to be dangerous but we know not to do it ourself if it’s over our head!

    I could talk all day about house projects/optimization and I love this forum!

    thanks for all the help and wisdom


  • 8 years ago

    The issue could be due to a simple wiring connection at the thermostat. Are you able to remove the thermostat cover and take a picture of the wiring connections? You may be able to fix this with moving one wire.

    Opening the windows n the evening allows humidity to enter into the house. My suggestion is to keep them closed and get the humidity in the house below 50%. In the long run you will feel more comfortable and use the same energy and possibly less. The basement dehumidifier running 24/7 uses a lot of electricity. You want less humidity so it will stop running.

    Buy yourself an inexpensive temperature humidity and temperature gauge. There are plenty of choices on Amazon.

  • 8 years ago
    last modified: 8 years ago

    What mode was your thermostat in before you turned the fan on—cooling, heating or off? Post a pic of your thermostat. I realize this is the equivalent of asking, “Is it plugged in?” but it’s best to start with the basics. :)

Sponsored
Schlabach Woodworks
Average rating: 5 out of 5 stars22 Reviews
Franklin County's Reclaimed Wood Professionals