Software
Houzz Logo Print
corinne_masterson

What do you do with your switch plate covers?

Just painted our whole house & need to replace/ start fresh (none of them matched each other or anything else)



I've never even noticed my switchplate covers
White plastic is fine
I paint them to match my wall or tile color
I paint them to match my trim
I use metal or embellished switch plate covers
Other

Comments (25)

  • 8 years ago

    it depends. depends on the color of the wall, the style of the house, where they are located, etc. If doing gray walls, they have gray switch plates and outlets. I redo those so they're a close match to my wall color. If it's an odd color, you can buy the wood covers and paint them to match.

    otherwise, just do something nice rather than the .59 cent off white plastic basic looking ones.

    Corinne Masterson thanked Beth H. :
  • 8 years ago

    Ok so you like painting the wood ones generally? That was my original plan but somebody warned me it would "look like the painter just covered over them".

  • 8 years ago
    I have the same problem. I like the idea of painting wooden wall plates to match but you still have the problem of the switches not matching.
    Corinne Masterson thanked Wendy
  • 8 years ago

    I have a lot of pretty ceramic ones with different artwork, colors, etc on them. For the kitchen I like the stainless ones. When we moved into this house they had just painted all of them to match wall color and didn't remove them. Just slapped it on like Beth mentioned. Looked awful. They even painted the toggle switches so we had to replace those as well. Stupid and lazy to do that.

    Corinne Masterson thanked Belahn
  • PRO
    8 years ago

    Other than the ones beneath my kitchen cabinets, all the switch and outlet plates in my house are solid polished brass with a gadroon edge. THey are easy to keep clean and look very nice. When the lacquer wears off in about 10 years, I take them to my local brass polished and have them polished and re-lacquered. I see them and the solid polished brass hinges as "jewelry" in my rooms.

    Corinne Masterson thanked Anglophilia
  • 8 years ago

    Legrand

    Corinne Masterson thanked Jennifer Svensson
  • 8 years ago
    I do the oversized nicer plastic ones to match the trim in most of my house (white). I haven’t decided what I am doing with the outlets in my gray tile backsplash yet, but leaning towards stainless.
    Corinne Masterson thanked K R
  • 8 years ago

    I admit to using the plastic ones...we have the larger rectangle switches/outlets and I prefer the plate be part of the switch rather than part of the wall.

    Corinne Masterson thanked User
  • PRO
    8 years ago

    I always pick the closest match to the wall color that is commercially made out of plastic. There are some high end lines like Lutron that have a good color selection.

    Corinne Masterson thanked Vicki Simon Interior Design
  • 8 years ago

    If your trim is white - no problem, if not I agree with Vicki. When the wall material is something other than drywall you need lots of samples to select the best color. Beth's example of the stark white outlet on the stone should be, IMO, posted everywhere tile and stone is sold.

    Corinne Masterson thanked chiflipper
  • 8 years ago

    It depends on the application: If I want them to look as vague as possible, I'll choose a pale colour that's close to the wall colour, but not painted to match the wall because then the outlet or switch -- which is white or ivory -- stands out too much for my liking. I'd rather have the switch plate match the switch than match the wall.

    On the other hand, there are some places where a uniquely decorative switch plate is a good fit, as part of the overall decor.

    Corinne Masterson thanked Toronto Veterinarian
  • PRO
    8 years ago

    In most of my rooms, like Anglophilia, I have antiqued brass switchplate covers. Rejuvenation has a great selection in many different metal finishes. In my kitchen backsplash I found a Lutron color the exact match to my backsplash tile. The rest of the kitchen has satin nickel.

    Corinne Masterson thanked Diana Bier Interiors, LLC
  • 8 years ago
    All of our switch plates are very close to wall color. I want them to blend in not stand out, that would be way too busy for my eye to have them all stand out.
    Corinne Masterson thanked iheartsix
  • 8 years ago
    Switch plates that stand out are so unattractive. Especially on a backsplash. Your eye should enjoy the straight run of the tile and not be stopped by plugs. I love the photo of the painted tile look switch. That’s what I do too. You can buy paintable plates at the big box stores and paint over them for all your rooms. Wallpaper over them if you have wallpaper.
    Corinne Masterson thanked lmmcnitt
  • PRO
    8 years ago
    I use white decora switches and outlets with screwless plates for a clean look. I have white trim and off white walls.
    Corinne Masterson thanked HALLETT & Co.
  • 8 years ago
    last modified: 8 years ago

    In our last kitchen, we used black switches & outlets, and stainless plates. In this kitchen we used the white plastic plates on white subway tile. Throughout the house, we have ORB in most rooms, and art prints or decorative plates from Lowes in others. I also painted some outlet plates in rooms where furniture mostly hides them. We have undertaken the task of changing out all (dingy, beige & plastic) switches and outlets as we paint of finalize each room, and my tastes have changed over the last few years. I recently purchased from this art plate website

    Corinne Masterson thanked User
  • 8 years ago

    I have done all of the above in years past depending on the situation: regular plastic, painted wood, wall papered. Now that much of my space has been repainted a cream/off white, I am using the plastic screwless type. They are very simple and clean-looking. It is surprising how losing those two screws changes the look of the plate.

    Corinne Masterson thanked melinda1977
  • PRO
    8 years ago

    They are not IMO a decor item and should be as invisible as possible.

    Corinne Masterson thanked Patricia Colwell Consulting
  • PRO
    8 years ago

    We usually paint them out

    Painted Switch Plates · More Info
    a plate painted to match a Zuber wallpaper in the South Carolina governor’s Madiso
    Painted Switch Plates · More Info
    one of the hardest plates we have ever had to match
    Hand painted vents · More Info
    you can also paint all the vents out.

  • 8 years ago

    If I blended everything to match I would not be able to find the switch. Seriously!

  • 8 years ago

    White, Leviton Decora Rocker switches. I hate toggles.

  • 8 years ago

    I happen to have very cool and fancy metal switch plate covers! There were left in our last house and we brought them with us to this house. I do not care if they match the wall colors!

  • 8 years ago
    This discussion puts me in mind of ladies of my grandmothers generation who used to have dolls with crinoline skirts to hide the extra toilet roll in the bathroom, LOL. Unless you are also going to disguise the actual switches and sockets (not just the cover plate), what’s the point? And what about the cable outlet, central vacuum outlet, thermostat controls, timers, dimmer switches, etc, etc? These are just a fact of life in modern homes.
  • 8 years ago
    last modified: 8 years ago

    I think the location is important. A light switch going into a room doesn't bother me too much but my backsplash has way too many extra outlets that don't need to be there. It's visually jarring and choppy. They'll eventually go. For now the splash is painted beadboard and I painted these covers to match. I prime and paint all the tiny screws too.

    I bought mine at Home Depot and they were much less than these.

    paintable outlet cover

    With the exception of the master bedroom (and that was out of laziness) all our backplates are painted or stained to blend. I also paint wall vents the same color as the wall.