Drawer load is per glide, plus the drawer weight. So the drawers will actually hold 50 pounds. Which is way low in the cabinet world drawer glide ratings. Ikea has proprietary mounting locations. so new hardware would need to be filled and drilled, with precision, while the cabinet side is flat. Not after installation.

The better retrofit solution would be to divide the cabinet into more drawers, for a single height pan storage at 50 pounds each. If your drawer front is still made, and you are comfortable attaching the glides while the cabinet is vertical.

Have your glides failed? I have one cast iron skillet+ CI lid and some other heavy things in the bottom of a 36" wide Ikea base drawer and haven't noticed any problems for the 2.5 ish years we've had them.

They are getting wobbly when I pull them out.

I have used Ikea cabinets with all drawers for years no problem with all my pots.

Autumnferrante, maximera or forvara? There's a pretty big difference between the two.

All Ikea Sektion Maximera drawers 24" deep actually have a specified max weight of 55lbs 2oz

14 3/4" shallow Maximera drawers are rated for 44lbs 1 oz

That's quite enough for a couple of cast iron pots or pans.

If your drawers are wobbly, it might be that the glides are not attached securely to the cab sides. I'd check that.

I'd replace the glides to troubleshoot. You may have just gotten a bad batch.

I have three big cast iron 10" and 13" frypan, 14" Dutch oven, two 15" All Clad sauté pans and a Le Creuset cast iron sauce pan in a 36" IKEA Maximera drawer. It glides beautifully -- no problems. My kitchen is four years old.

I also wonder if you have Maximera or Forvara. It should not be wobbly at all.

Thank you this is very helpful information. I believe i just need to have the glides replaced.