Software
Houzz Logo Print
drsaj

Cost to replace plenum?

8 years ago
We just had our AC guy here who says our attic is cooler than our house due to all the duct leaks (4) at the plenum. He quoted $1,200 to replace the supply plenum and fix the ductwork going into the plenum. Does that quote sound high or about right? Thank you.

Comments (10)

  • 8 years ago
    His exact words: Replace the plenum with new and reattach flex tubing and reseal.
    Seal the supply and return plenums.
  • 8 years ago

    Get a second quote/opinion.

    drsaj thanked Elmer J Fudd
  • 8 years ago

    Get a couple more quotes. If you live in the hot, humid South, consider insulating at the roof line and sealing the attic.

    drsaj thanked ionized_gw
  • PRO
    8 years ago
    last modified: 8 years ago

    Costs to replace things of this nature are typically higher than if you spend more money doing additional things, which include the smaller things... like supply plenum.

    Cut rate installs (like if your equipment is newer) and you got the deal of the century. The deal often fades when little things like 'new supply plenum' is needed to fix air leaks in the attic.

    Not saying this is what happened in your case, just speaking of my 'general' experience in dealing with issues of this nature in going on 23 years of 'hands on experience'.

    As the deal may have been acknowledged by the home flipper or the previous home owner. The stories of how such things come into fruition is endless....

    drsaj thanked Austin Air Companie
  • 8 years ago

    Did he explain why you need a new plenum vs just sealing the leak points?

    drsaj thanked sktn77a
  • 8 years ago
    sktn, no, but that's exactly what my husband asked. We'll call him and ask.
  • 8 years ago
    Just talked to our AC guy. He said the plenum is "bent at the bottom" and "torn up." He quoted $500 for the plenum, but said the job is labor intensive to replace it.
  • 5 years ago

    I have the same issue where the Plenum is not sealed correctly and there are a few gaps that are noticeable. The issue we have is that we’re getting a lot of condensation underneath the coils, which cause high level of humidity inside the house. Would putting new plenum correctly with no leaks get rid of the condensation and height humidity?

  • last year

    Nonsounds like you have a dirty evapo coil and that is causing the extra condensation. that and dirty filters