Software
Houzz Logo Print
susan_kistler31

Color Washed Parquet Help

8 years ago

Hello! I'm seeking flooring advice.


What I have: Traditional parquet flooring (see picture). I have it in three large rooms (plus a couple of other areas). For one of these, I would like to color wash/stain it in a deep blue, then, seal it very very well.





The context: There are french doors to a patio along one side of the room, the room is in las vegas where there is lots of sun and warmth (but there is an overhang, so it's not tons of direct sunlight) and the room has AC that keeps it to 90 degrees (when we aren't there) or less, and this is a dining room that's also the main entrance to our patio so there would be lots of chairs and fairly high use.


My questions:


1. I can't find any examples of deep coloring on square block parquet. I can find staining in natural colors, and I've got plenty of that already happening. Has anyone tried this? From a process standpoint, any reason not to stain/color wash parquet in particular?


2. I have found three different approaches that give some version of what I'm seeking. I want to be able to see the grain of the wood, yet have a deep color, and hopefully stand up to the heat/sun while being scratch resistant. Yep, I want it all. Over at a beautiful mess, she used thin paint and then a protective finish (See Turquoise Color Washed Floor). Whereas this remodeler used Mixol directly in the polyurethane (See Blue Color Washed Floor). Finally, in the only example I can find on parquet at all, the floor below was done with General Finishes Blue Floor Stain. Is one option more appropriate than the other given the context or is it strictly a matter of which look I prefer?


3. Any idea of cost per SF for a professional to do? Any reason one of the approaches would be significantly more expensive than another or significantly different in cost from a standard stain application for which I can find general cost estimates?


Any other considerations (already know that it will be more difficult/impossible to undo - and that's fine)?





Please keep the aesthetics out of it and advice of "don't ruin hardwood by coloring it" is not helpful. In this case either it gets colored or it gets removed.


Thanks one and all.

Comments (13)

  • 8 years ago
    last modified: 8 years ago

    Go buy a blue rug. And Give up that goofy staining your floor blue idea immediately. It would devalue your home terribly to damage the original valuable parquet. By tens of thousands of dollars. And it would be terribly disjointed.

    If the floors need refinishing, as in actually need it, then keeping them the same natural color that they are currently is the only choice that makes any sense at all. Wasting 15K on one room to make it blue is just nuts.

  • 8 years ago

    Stain it, but not blue. BLACK. It will be stylish and timeless. Blue will not.

    Living & Dining Space · More Info


  • 8 years ago
    last modified: 8 years ago

    SJ McCarthy,

    That is incredibly helpful information from beginning to end. I cannot tell you how much I value your patient, detailed and useful answer that focused on the questions I asked. I now know where to start when talking with a floor refinishing professional.

    I'm not concerned at all about resale value, I have allergies that make rugs impractical (the one in the picture is from the previous residents), and the blue will work wonderfully with the white table, chairs, and bookcases in the room, so I also appreciate that you didn't insult my design aesthetic or feel the need to belittle me for asking how to fulfill a dream.

    Appreciatively, Susan

  • PRO
    8 years ago

    Three options come to mind, the General Finishes stain you mentioned, Berger Seidle BaseOil Color and Transfast Aniline Dye blue stain. The aniline would give the most depth of color but would be more prone to fading and it's a water stain so nearly impossible to get uniform on parquet. I'd definitely eliminate that one. General Finishes stains are highly regarded but I've never used them. They would warrant more research. I have done Berger Seidle oil finish and they have a multitude of colors and options.

    http://www.berger-seidle.de/us/products/classic_baseoil_color.htm

    Color chart: https://images-na.ssl-images-amazon.com/images/I/513qPyftbfL.jpg

    These can be used as a base stain and are compatible with other Berger Seidle finishes. If you don't use a film forming finish over the BaseOil you should be able to re-oil to address potential fading.

    Another product came to mind. Rubio Monocoat has a blue but I think it's special order. I'd look into the Berger Seidle. If you're a DIYer or even just a little adventurous, they make a boxed kit with all of their BaseOil colors.

    Without knowing the complete process I'd have no way to price it but I'd guess upwards of $5.00 per square foot.

    Susan Kistler thanked Johnson Flooring Co Inc
  • PRO
    8 years ago

    I just wrote a long post, hit send and it disappeared. :(

    Short version. Don't try tinted finish. It doesn't achieve depth of color without multiple coats. If it's mixed too strong it will almost certainly be streaky. You could maybe get away with it on a linear floor but not parquet

    The General Finishes stain is probably your best option but look into Berger Seidle BaseOil Color. They have a rainbow of colors that can be coated over with other finishes from Berger Seidle. https://images-na.ssl-images-amazon.com/images/I/513qPyftbfL.jpg

    Susan Kistler thanked Johnson Flooring Co Inc
  • PRO
    8 years ago

    You can color wash with latex paint 20:1 mix. Then seal it with a high quality water base system. I would lightly wire brush it to allow the wood grain to show through more to avoid an opaque finish.

    Susan Kistler thanked G & S Floor Service
  • 8 years ago

    G&S Floor - Thank you! Are water based systems more or less prone to fading?

  • 8 years ago

    Johnson Flooring - Looks like both great responses came through, thank you! My initial search isn't turning up a General Finishes specialist in Las Vegas, so hopefully the Seidle will help. Their blue from the color chart you referenced looks gorgeous (I like it with a bit of green tint as they seem to show) and the idea of using a non film-forming finish that would allow me to re-oil is spot-on. I'm ripping up the parquet in another room (I have a LOT of it in multiple places), and can use the ripped up pieces for testing.

  • PRO
    8 years ago

    Use sports paint by Bona or Poloplaz to prevent fading. Add the paint to a natural stain, then apply like stain. Use oil with oil and water with water. Top coat with a durable finish.


    Search for contractors that specialize with sports floors or a certified floor craftsman in your area for this type of work.

    Susan Kistler thanked G & S Floor Service
  • 8 years ago

    I'm going to ask a silly question: How thick is the parquet? If this is the thin version of finger parquet, it may not be able to sanded/refinished. Some of these parquet products had 1 sand/refinish in them and then they were done.


    I can see some Saltillo tiles in the background as well as some carpet. Both the tiles and the carpet appear to be sitting MUCH HIGHER than the wood. That tells me this stuff is rather thin (especially if it is sitting LOWER than carpet).


    Your question about HOW to do this may be moot. If your wood is too thin (some of the sand/refinish guys who have done this can tell you the THINNEST PARQUET they have ever refinished) then you may not be able to do anything with the parquet other than rip it out.


    Just for grins and giggles, go ahead and measure the THICKNESS of the wood and report back.

  • 8 years ago

    I'm not in Las Vegas where the parquet is again until next month I'm afraid. Both carpets that you see are actually area rugs sitting on top of the parquet in one instance and on top of the saltillo in the other instance. The parquet is about the same height as the saltillo (from memory). What looks like a difference is because the transition from the wood to tile is a t-type that is sitting on top of both. Having said all this, that's a really good point you make. The parquet is from the 70s and in relatively good condition suggesting it has been refinished at least once if not more. I'll measure as soon as I get there, and report back with both that and what a floor refinisher says. Thanks so much one and all for helping me to understand more about the questions/issues to discuss with him.