Software
Houzz Logo Print
joelcoqui

depth of range hood

8 years ago

I posted before with this question and cant seem to find it. Why are there different depths made for ranges/cooktops when standard depths on these are 24" What depth hood should I get for an induction cooking range? There are 18" and24"

Comments (7)

  • 8 years ago

    laymens terms please. what should I get for 24" deep 30" wide induction. wall with chimney hood, wall cabinets next to it will be 12" deep.

  • 8 years ago

    Start here: https://www.gardenweb.com/discussions/5161173/hood-faq


    With induction you'll only need to be concerned with what you cook and the resulting odors, grease, steam, etc. So, a lot depends on what kinds of cooking you do and you tolerance for smells of meals past lingering in your home.


    If you pan fry or sauté then you'll want a hood at least 6" wider than your range and ideally 6" deeper. Effluent rises and spreads out as it does. Anything not captured by your hood as it rises or that rolls out from under your hood will spread throughout your house.


    If you mostly boil water then you'll need less.


    There are a few of us who've bought CaptiveAire or similar commercial systems since consumer hoods are not very effective. We want to make sure that cooking odors are exhausted and not left in our homes. But it all depends on what's important to you and what styles of cooking you do.


  • 8 years ago

    Thank you. I also dont want to hit my head as I am cooking and grabbing the pot in the back of the range. in addition, I dont want it to look like a stupid protrusion from the 12" deep wall cabinets.

  • 8 years ago
    last modified: 8 years ago

    Here is what you should look for (from the collective wisdom of the Appliances forum gleaned over several years): a depth of 22-24" (24" is ideal, but sometimes those can be expensive, try to get 24" deep, but 22" deep would be OK); width that is ideally 6" wider than your cooktop (again, that is ideal, many people have hood same width as cooktop, but if you are able to, try to get one that is 6" wider); a canopy shape, not a flat shape; baffle filters, not mesh filters; metal, not glass, as glass hoods are a PITA to keep looking clean and only come with mesh filters; a distance between cooktop and bottom of hood of 30-36"; and make sure your exhaust duct is big enough - the hood specs will tell you the size of exhaust duct you need.

    Don't worry about banging your head, you won't.

  • 8 years ago

    The answer also depends on the counter depth and where the cooktop is placed on the counter.

  • 8 years ago

    We are installing a 30" wide, 24" deep induction range (but our base cabinets will be 27", so we've added to the depth of the hood) . I cook everything: finish steaks in screaming hot cast iron, wok/Asian, frying in oil, boiling large pots soup/stock/pastas, etc. Our hood will be 3" wider on each side (or a total of 36" wide). The depth is planned to be 28.5" which will be even with our range.... although we may change our minds and extend it further.


    If you go into cabinet showrooms with hoods, you'll see that you won't really bump your head (a concern of my husband's - who does not cook... ever).


    If you've only got the choice of 18" or 24" I'd strongly recommend the 24".