Software
Houzz Logo Print
bethyh

Flat paint touch up looks darker?

8 years ago

Tried to touch up a few scuff marks with same flat paint, but appears darker. Any suggestions would be much appreciated! Thanks!

Comments (12)

  • 8 years ago

    Its possible. You say it is the same paint. From the same can? How long ago were the walls painted? What color is it? Do the walls get a lot of direct light?

    Some paints can fade, like fabrics. Sometimes you have to paint the whole wall.

  • 8 years ago
    agree with jn. i have very old touch up paint that looks much darker. the paint on the walls will fade over time. you could try a light sanding to see what happens to the tone. might work, might not.
  • 8 years ago

    Thanks! It was painted with new construction this summer...maybe June? Color is worldly gray-beige/gray... I went back to SW with the label so I am guessing it is a close match.

  • 8 years ago

    What sheen? Flat? Low Lustre?

  • 8 years ago

    Flat....

  • 8 years ago

    It should be close.

    Other potential impacts: Brushing the new paint onto the existing which was sprayed or rolled. Existing paint a cheaper line (i.e Promar) vs they sold you Emerald touch up paint. Matte vs Flat. The two are not the same.

    But yes, I have a whole wall to repaint because my touch ups 'flashed.' Its pretty common.

  • PRO
    8 years ago

    Did you patch something with porous patching compound? If using the paint directly on a porous patch, it will possibly look dark and flat. A second coat of paint will often correct the darkness and flatness.

  • 8 years ago

    Sounds like it was not a very durable paint, if you have to touch-up in a few months.

  • PRO
    8 years ago
    last modified: 8 years ago

    For small touch ups on rolled walls, I will stir the gallon, close the lid and shake it a couple times, open the lid and use the paint on the lid as a palette to dab a roller cover in. I will simply hold a roller cover in my hand, dabbing the paint over the imperfection. This gives the texture that the original roller gave.

  • 6 years ago

    I just had this happen to me yesterday. Did you ever figure out what caused the problem and how to fix it? I am renovating my living room right now and painted yesterday morning using a spray gun. After finished I noticed a few areas where the coverage was not 100% so I grabbed a brush and went over the areas that didn't get enough spray. They all dried darker than the rest of the walls. I have never had this happen before and I am a pretty avid house painter, at my own home at least. I always use flat paints because I think they look better and I have done touch ups before and never had this problem. I read somewhere that if you applied the original and touch up coats through different methods, that this will happen and that to remedy it, you have to just go over everything again with the same method. I am not gonna go through all that with the spray gun again. I guess I will try to get some rollers today. But did you figure it out? please let me know.

  • 6 years ago

    Spraying is quick and easy and for doors and trim it gives you that glass like finish, but it changes the paint.


    For trim and doors I always save a small mason jar of the trim paint that has been sprayed through the sprayer. For walls I may spray the first coat, but I always roll the second coat.

    When I need to do touch ups I thin the paint by 10% because the area that has been scuffed absorbs more liquid than the area around the touch up. Wicking of moisture darkens paint. The scuffed area may need to be touched up and then touched up a second time after the first coat has dried.


    If the paint on the wall is still fairly new (less than 2 years) this works. Older paint has discolored through exposure to the elements. I can usually get it close enough that I can blend it in using a dry brush and feathering the patch into the surrounding area, but sometimes need to just accept that it cannot be touched up and I need to paint the wall.