Software
Houzz Logo Print
service1956

Removing aluminum soffit

7 years ago

I just had my roof replaced when the contractor showed me of an air intake problem. We went into the attic and he explained that you should see light between the roof deck and inside ceiling. He pointed out with a flashlight that the insulation was contacting the roof deck blocking air intake. There was no outside light that could be seen at all! He then told me that the best way to correct it would be to remove the rain gutters, pull the aluminum fascia nailed to the wood fascia, and then remove the soffit panels to access the insulation. I plan on doing this in the spring when I am having new gutters installed. I will remove the old ones myself to give me a couple of day's to fix this problem before new ones are installed.


So I went out and did some investigation to see how the soffit was put up. I pulled out on the bottom part of the aluminum fascia that has a lip on the bottom that laps over the outer edge of the installed aluminum soffit. What I had found was that the outer edge of the soffit was not nailed in, but rather just sitting inside the bottom lip of the fascia. I thought wow, that will be fairly easy seeing that the gutters will be down anyway.


The problem I see when removing the fascia, is that all of the soffit sections will fall out creating a big problem when trying to reinstall. The builder that installed this back in 1973 must of had a way of keeping those soffit sections intact while installing the fascia. Could it be that the soffit will sit into the inside channel secure enough for me to install the aluminum fascia?


I need to know what the builders technique was when he installed it.

Comment (1)