Software
Houzz Logo Print
rockybird

Do these gutters look okay?

7 years ago
last modified: 7 years ago

Unfortunately I have to have these damn things installed, but luckily on the back of the house. I dont know if the architect messed up on the design but during a rainstorm the block walls were wet. This was before the insulation went in. So they coated the wall with elastomeric paint and then added these rain gutters this past week. The metal seems really thin. There are a few joints that bother me - wont they just erode and leak? And the L shape looks odd, shouldnt it be more of an angle? It’s a huge tripping hazard and I hate them. I can just see someone tripping on them and falling off the edge on the left, which is about a 12 foot drop.


I’m going to ask the landscape architect if a drain pipe can be installed underground, maybe that is the solution.













Comments (13)

  • 7 years ago

    yes! Exactly!

  • PRO
    7 years ago

    The gutter looks find, but the termination of the downspout needs to be managed properly, as Worthy mentioned. I had a house where the roof surfaces funneled a large amount of water to one point. I solved the problem by locating a koi pond at that point with an overflow drain to a lower part of the site.

    rockybird thanked Mark Bischak, Architect
  • 7 years ago

    Thanks Mark! Do the downspouts looks okay? I’ve never seen any at right angles and they have seams. I worry that willl corrode? I emailed the landscaper architect to see if we could figure out a way to move them and create a drain.

  • 7 years ago

    Not bad, not great. Certainly manage the water further away from the foundation... My gutter / roof guys did the downspouts offsite and then installed them - made for a higher quality. I'd also like to see a better looking attachment standoff - folded edges, etc.

    rockybird thanked just_janni
  • 7 years ago
    last modified: 7 years ago

    I agree janni. They could look better. :(. But the gutters luckily do blend in with the roofline on the other side.

  • 7 years ago

    I wouldn't worry about the right angles - they caulked the insides / connections / direction changes. Most of the commercial gutters that are custom like yours have sharper angles that the "normal" residential downspouts that so many are used to seeing.

    i'd just focus on the water moving away from the foundation and let it go. :-)


    rockybird thanked just_janni
  • PRO
    7 years ago

    These square gutters will probably handle more water runoff than the Home Depot round sections. That's the good news.


    The bad news is that the runoff from the downspouts may easily cause erosion of the pad on which the house is built, as Worthy notes.


    If you have a landscape architect, ask her/him for a solution for all of downspouts which will handle the water drainage while protecting the building pad from erosion.


    You'll be glad you did in just a few years.

    rockybird thanked Virgil Carter Fine Art
  • 7 years ago
    last modified: 7 years ago

    Hi Virgil,

    Thanks! This is my main concern too.

    I emailed the landscape architect yesterday. I also emailed the contractor and architect. The landscape arch. Said he will look at them next time he’s out here. It seems like we should be able to install a drain with a pipe carrying water away from the dirt, maybe suspended out over the overhang.

  • 7 years ago

    Yes I think youre right janni...they are just gutters anyway.

  • 7 years ago

    For my house I always terminate drainbox with underground landscape pipe. And don't just terminate 5' as min requirement, I terminate 15', 20', 25' away.

    rockybird thanked BT
  • 7 years ago
    last modified: 7 years ago

    And for the love of God - if you attach this to black corrugated drain pipe get the DOUBLE WALLED stuff and not that single walled, glorified drinking straw crap from Home Depot. The double walled stuff is only slightly more expensive and won't crush when someone heavier than a snooty couture model walks over it.

    In order to transition, you might need to get some pieces from a real commercial supply - we had to get plastic caps and have rectangular holes cut in them - I can look up the info if you need it.

  • 7 years ago

    Thanks BT! THis is what I think we will have to do. That’s helpful to know you did this. How did the downspout meet the underground drain pipe?