Software
Houzz Logo Print
snobunyz24

concrete slab w moisture?

7 years ago

We moved into home- replaced carpet w wood after we thought we resolved water issues (we thought a pipe burst which caused mold/moisture on the baseboards and under the carpet).

Those rooms still smell like they are curing. Now im worried its a problem w moisture and the slab itself.

1954 house so prob no vapor barrier. What do we do? What can we do to help save the floors and prevent further mold/water in the home? (Please don’t say we should have floated the floors etc— i know now but we didn’t know then). Can this be saved?

Comments (3)

  • 7 years ago

    snobunyz24 You've got another thread going with this issue. Have you investigated the 'burst pipe' concept? Have you jacked out the concrete where you believe the pipe burst?


    Assuming this is NOT a burst pipe, the only thing that can be done is to wait. While you wait, you can bring in a moisture mitigation expert to monitor the moisture levels IN the slab (not just at the surface). To do this, a small section of the glue down floor will have to be removed (like 1ft x 1ft) and a small indwelling probe inserted into the slab. This is done by drilling a small hole into the concrete slab about 3/4 of the way down. The probe is then inserted into the hole. The first reading can then be made around 72 hrs later. Multiple readings can be done using the same probe.


    To be precise, this type of monitoring can/should be done in multiple places in the slab. A minimum of 3 units per 1000sf is the bare minimum. Usually 5 are used in that sort of square footage.


    Measuring the moisture that is IN the slab will ACCURATELY depict how much moisture will move up to the surface and evaporate into the air. The moisture content will rise RAPIDLY if the concrete is CAPPED. Capping occurs when a solid, non-breathable material is placed ON TOP of the slab (something other than carpet). A glue down floor is going to create a cap.


    That means that moisture readings done PRIOR to the floors being installed will be considered 'useless' once the floor is capped. The moisture will simply build up 'pressure' until it 'blows through' the cap...ie the adhesive. Kinda like shaking a soda can...and then waiting for someone to pop the top.


    Once the EXISTING moisture levels are revealed, you will probably need to remove all materials and start again.

  • 7 years ago

    There is no plumbing in the slab it comes down through the attic, so the burst pipe in question would have been in the shower/leaking shower pan across the hall, bathroom sink across the hall or the ac condensate line, also across the hall.

  • 7 years ago

    We had a plumber out to check and no evidence of a current leak and no evidence of current moisture damage. Its like a messed up scavenger hunt

Sponsored
Kuhns Contracting, Inc.
Average rating: 5 out of 5 stars26 Reviews
Central Ohio's Trusted Home Remodeler Specializing in Kitchens & Baths