Software
Houzz Logo Print
webuser_855012796

Wood Paneling- 1980

7 years ago

We just moved into a custom built 1980 ranch covered in wood paneling. Several people have told us they think they put wood flooring on the walls, we want to paint all the brown white. Any suggestions for best paint or process to make the panels white? Any suggestions greatly appreciated!

Comments (15)

  • 7 years ago

    Wow, that’s a dilemma. I’d be tempted to remove the planks entirely. Painting will be an arduous process. Just my amateur opinion.

  • 7 years ago

    If you want to paint the walls regardless if wall paneling or floor material, it is possible. First step would be to clean, not that i see dirt just part of prep, nothing soapy, just warm water unless there is goo anywhere, then a primer, any primer would do (water base).That primer will adhere to wall surface then paint will adhere to primed wall. That might be easiest and most inexpensive. May create a nice accent in some of the rooms?

  • 7 years ago

    This question is a sort of technical one...I would rely on the advice of a local high end paint store...using quality products are important on projects like this...

  • 7 years ago

    If it were my house, I would want to find out what is behind the wood. If it is drywall, I would remove the wood, repair the drywall and paint it. I see an electrical outlet in the photo. If you remove the cover, you may be able to figure out what is behind the wood.


    I must say, that is some nice looking wood paneling.

  • 7 years ago

    Thank you all for the advice we did a test today. The far right is two coats and far left is just one coat.

  • 7 years ago

    It definitely looks like flooring. If it is nailed on, I would remove it and fill the nail holes and paint it.

  • 7 years ago

    It does look like flooring, LOL! However, white paint might make it look cottagey or Farmhouse-ish.

    I would try that before I started pulling nails and messing up sheetrock and repairing holes and so forth.

  • 7 years ago

    I think that would really brighten those rooms. I have worked in a ‘high end’ paint store for 10 plus years now. Always best to explore options, but please keep in mind, since we don’t know the surface of the material used, i regress, be safe and use a primer that specifies ‘for all surfaces’. It will cost a smidge more, but you get what you pay for in paint material. Looking forward to seeing your end result :)

  • 7 years ago

    Was wondering if you had moved forward with your paneled walls?

  • 7 years ago

    I would first paint with a sanding sealer (so you don't have to sand to get good adhesion) because of the glossy looking finish so paint adheres better then paint. At first glance I thought it looked like a combination of 2x4's and 2x6's nailed on wall. The spot you painted looks good.

  • 7 years ago

    We used one coat of primer and about 3 coats of white and it turned out pretty good! The room is so much brighter!

  • 7 years ago

    We are very happy with the results! Looks like a whole new room.

  • 6 years ago

    Wanted to send a huge update! We are figuring out these wood paneling walls!

  • 6 years ago

    Before and after wood paneling in family room