Software
Houzz Logo Print
acowsert

Glass Tile Problems

7 years ago
last modified: 7 years ago

When consulting with a tile installer, he told me that all his clients had been unhappy with glass tile due to thinset ridges showing through the edge of the glass tile. He recommended using a different kind of tile or we would be unhappy. I love the way the glass tile goes best with the existing countertops. Has anyone successfully been able to install glass tile without ridges showing? Does anyone have tips?

Thank you!


Comments (10)

  • PRO
    7 years ago

    The tiler just needs to adjust their method of installation. Instead of applying the mastic or thinset to the wall they need to apply it only to the back of the tile and leaving a bit of the back perimeter, say 1/2" free of mastic/thinset. When the tile is set this will ensure that there is no mastic/thinset in the area/recess to be grouted. If when setting the tile some mastic/thinset ooze's into the space then they need to clean it out before it sets. Takes a bit longer but completely doable.

    acowsert thanked The Kitchen Abode Ltd.
  • PRO
    7 years ago
    last modified: 7 years ago

    Perhaps all of his customers are unhappy. Because he is doing it wrong. You may need a different installer. Use the screening questions below to determine if you are better off finding someone new. https://www.ceramictilefoundation.org/homeowners-guide-to-hiring-qualified-tile-installer

    The ridges on the wall are all backcombed, in addition to the tile itself being backbuttered, so they do not present as ridges. Now the edge of the glass does let some of the thinset show, and it blocks the light from coming in from the sides, which makes glass duller on the wall than in the box. There are translucent grouts that mitigate that. And it just reinforces that you may need that CTI.

    acowsert thanked User
  • PRO
    7 years ago

    Well glass tile is known to have edge problems at times. To say that he doesntt know what he or she is talking about is wrong. Here we have tie professional looking t the proposed tile, job and cost and is telling you what the end result will look like. They did the right thing!!! Maybe its out of their ability and maybe its out of your budget??


    If every tie person did what yours is doing there would be less issues. Glass tiles have some inherent issues. He is talking about the edges on some thicker glass tile. Your looking into the back or grout of the adjoining tile. At the proposed dollar amount maybe he isnt going to address that and knows you will be unhappy with the job.


    To everyone saying they don't know how to install the tile how do you make that assumption without seeing the tile and proposed job?


    To me glass tile should be used as an accent at best. Its like pebble tile floors, look at al the complaints on here yet everyone just insists of using it. Yes, it can be done but it is expensive do to the additional work required.


    To start a glass job you need to buy a new blade, stone, different than stocked bag of thin set, watch every cut, watch every edge, etc, etc. that all costs money!!!!





    acowsert thanked Brian Gannon
  • 7 years ago

    I adore my glass tile backsplash. My tiles were back painted, so maybe that's why the ridges were a non-issue. When selecting an installer, I made sure to pick one that had lots of experience with glass tile. You might want to talk to a different tile installer.

    acowsert thanked arlosmom
  • 7 years ago
    last modified: 7 years ago

    what kind of glass tiles do you want to do?

    Cooks kitchen is correct, with see-through glass, the trowel marks on the thinset are back combed and smoothed before setting the tile.

    see the trowel marks made by the notched side? after you spread it out, you go back over it w/the smooth side and carefully knock down all of the ridges so it's nice and smooth. Then the glass tile gets set on that. No trowel marks will show through if it's done like this






    Any competent tile setter knows this. if you want glass tile, I'd strongly suggest you go w/another tile guy. He's basically telling you he doesn't know how to install these properly if all his clients are unhappy!

    or, go w/back painted or opaque glass.


    acowsert thanked Beth H. :
  • PRO
    7 years ago

    There is no reason for ridges to form if the tile installer is experienced I am not a pro tiler and have still installed these with no issue maybe he just is not comfortable with his saw blade for cutting that is where I think issues arrive some of the pics aboove show way too large of grout lines and I find that the smallest grout possible with non sanded grout as close to the tile color as possible yeilds good results

    acowsert thanked Patricia Colwell Consulting
  • 7 years ago

    When someone tells you that they can’t make their customers happy? And you still use them? Do not expect to be part of a magical exception.


    Tell your GC that you are having second thoughts about your backsplash choice, and you’re just going to not do it at all until you figure it out. Tell him to credit that amount to your final payment, and go ahead and finish up everything else.

    acowsert thanked User
  • PRO
    7 years ago
    last modified: 7 years ago




    acowsert thanked BeverlyFLADeziner
  • 7 years ago

    Great videos! Proper tiling requires math skills, an artists's eye, and extensive knowledge of types of tiles and the proper products used for mounting and finishing them. The best Pros will insist that the substrate (wallboard) be as flat, smooth, and as even as possible before mounting the tile. The Pro you want to hire will be "booked out" for 4 to 6 weeks, they will be worth the wait.

    acowsert thanked chiflipper