Software
Houzz Logo Print
westes

Recommendations for How to Design Downspout

6 years ago
last modified: 6 years ago

I have one downspout that sends water back up against the home, and I am trying to design a cheap solution that avoids having to dig a french drain. The problem in this area is the slope of the sidewalk sends water back towards the home. So if you empty water to the sidewalk, it is going to reverse direction toward the home.

I have this temporarily "fixed" with a rube goldberg contraption as shown in the photo. I put a set of downspout extenders - one to create a slope down; one to get water extended from the downspout, and one to prevent the water from coming back towards the house before it drains to the lawn. Does anyone make a 40 inch long plastic "ramp" that would start from a height of about four inches and taper down to zero on the distant end? Then I could get rid of two of the three devices in my photo and just run the longer piece on top of the ramp.

I could alternately use one of those plastic roll out water extenders but I worry about those collecting sediment and no longer working. Seems like a hassle long term for maintenance....

Honestly what I really need is just a very long downspout extender with a slope. No one seems to make these with a length more than about 24" and I need about 40".

Does anyone else have ideas on how to better solve this problem?


Comments (3)