Software
Houzz Logo Print
nick_schwed

Shower Handle Help!

6 years ago

We have a shower with two valves (instead of the one diverter valve) and I am looking for two cross arm knobs. I’ve done a ton of research and I’m finding it incredibly hard to find anywhere online that just sell two handle valve trim. Will any faucet knobs fit on these valves or do I need something specific? Sorry, this is not my area of expertise. Thank you!

Comments (11)

  • 6 years ago
    last modified: 6 years ago

    Do you know for sure what these two valves do? It seems to me like you are saying that instead of a single pressure balance valve, where you have one valve that turns on both the volume and the temperature, you have what is known as a thermostatic shower valve, where the one valve controls only the temperature. The other valve then controls the volume of the water. You need to know what your system is. You should have one of these two types of shower valves.


    It is no longer okay to have simple hot and cold water handles without a way of guarding against scalding the person in the shower. You are not saying that this is what you are looking for, are you? If yes, what is your anti-scald method? Do you know who the manufacturer is? Were these sold as shower valves in the US?

  • 6 years ago

    I’m sorry, I should have gave more detail about the valves. They are hot and cold valves so the one on the left is hot and the right is cold.

  • 6 years ago

    What is your method of scald prevention?

    Are you in the US?


  • 6 years ago

    Here is a plumbing blog post that explains how the law in the US was changed and if you replace a shower valve, it must be of the anti-scald type. As far as I know that means one of the two types I described above. Blog post

  • 6 years ago

    I don’t want to replace the shower valves...I’m simply looking for trim (handles) for them. I’m just asking about what type of handle will fit on those valves shown in the picture. Thanks!

  • 6 years ago

    Our house is older, and these are the valves that were installed when we bought the house

  • 6 years ago

    The article gives some ideas on how to find the old handles. I believe it said you can look for old stock in stores. Small local hardware stores may be the best bet. Those tiles are not old. You will have to check with the code to learn how much you can change without having to come up to code.

  • PRO
    6 years ago

    I'd ask the plumber for suggestions.

  • PRO
    6 years ago

    Probably the easiest option is to have the plumber remove one of these valve stems (it will require turning off the water). At that point take it to a plumbing supply store and hopefully they will recognize it (MOEN, delta, Koehler, etc). At that point they can show you options.

  • 6 years ago
    last modified: 6 years ago

    Search for universal faucet handle. There are several styles. They include several types of adapters. Here's one example. No endorsement intended.