Software
Houzz Logo Print
a1an

Should I replace this Wolf lemon

6 years ago
last modified: 6 years ago

Not sure where to start......so here goes.

Wolf DF range coming up on 12 years.

For the 1st 6 years, I paid ZERO out of pocket fees on any repair as I did have a extended warranty....

All Warranty was done by Wolfs/SZ factory tech

Once out of warranty, I have done all the repair work myself.

Seems like every 24 months, I spend about $300+ on the repair work. Today would be the 3rd time I've ordered parts to overhaul my unit. Parts are MAP *MSRP* locked and are just obnoxiously priced for what the part is....even called SZ today asking for some -relief-, can you connect with the local authorized dealer and LMK and could I buy these parts at a qty of dozen or the like for some better discounting....

The root cause is their gaskets/orings on the burner assembly justs -dry rots-. It's as if the part is not designed for heat.

You can't just replace one gasket, as replacing one gasket breaks every single gasket on every other burner so you end up needing to replace ALL of them. The tech guys on the phone@ wolf are just astonished that when I call in, asking what's the PN for this, etc, that a -mechanically capable- person is DIY this. When I do the repair, I go all -in- replace all the spark modules/ignitors as well. Why on those 2 parts ----well, if they ever fail as well, you end up breaking all seals to replace it, so it's a penny wise pound foolish decision for me to spend the spend and do a overhaul vs just a -gasket repair-.

Coming her to the GW forum asking for some POV. Should I stop putting $$$$ into this lemon and move on with a new stove. Stove works great....until the gaskets dry rot.

---as a further detail as part of my repairs, I have even replaced the top once, and even have replaced 2 burners figuring maybe a -warped- burner would be causing the issue I am seeing so consistently--


----I know this is a design defect as my newer DF in another house has not had the issues I describe.--

Comments (3)

  • 6 years ago

    You might provide the model number of your range, the part number, actual part name, and even a photo of the part. Someone here might be able to find another source of the part.

  • 6 years ago
    last modified: 6 years ago

    It's a wolf DF stove. I believe it's their *gen1* line as the current DF series - the burners if not even the design of the stove grate feet are different on their current lineup (maybe learning from the flaws of the former).

    I have considered doing some homework but while the gaskets are *custom cut* specific to the burners (it's not just a round flat profile), the O ring I have considered looking for...what it's a moot point, as I still need to order the gaskets and the (gasket kit comes with the O ring).

    I just figured at $300+ ever 24 months, just p1ssing $$$ towards a BlueStar replacement.


    Sure appliances break and may require a repair. But this is more like a old German car, where it's not repair but annual 2 year $$maintenance.

    Unbuttoning/butting the stove is pretty straightforward - however, there are some elements where it does take some careful steps on alignment, and once you torque things back down to 100lbs inch etc, test run it, if the alignment is slightly off, during the test turn on, you will need to unbutton things and rework it. That can set you back 15-45 minutes on aligning it. I know I said the repair is straightforward - just certain things fitting it , is like trying to make a circle fit into a square.




  • 6 years ago

    Unless you want to hire a machine shop to cut gaskets for you from silicone or fluorocarbon or other suitable exotic gasket material, you have to consider your cost per year for keeping vs. replacing. Keeping includes your expense plus the value of your time -- to you. Replacing means paying the effective yearly cost for a new DF. Even under conditions of zero interest rates, the price of the new DF, prorated over its likely lifetime, is still a cost. Just pretend you are renting one range or the other and decide which is the better deal.