Software
Houzz Logo Print
grapefruit1_ar

Switch from gas to electric?

6 years ago

We will be replacing all kitchen appliances soon. These will be in our second home, so they will not see full time use. There is currently a gas stove, but I would much prefer electric. Is that an easy switch? Thank you for your thoughts!

Comments (5)

  • 6 years ago

    Electric usually requires a 50 amp 220v outlet on its own circuit with a double breaker in your fuse box. Your stove location may already have an outlet. Otherwise you'll need to have the 4 conductor wire run and an outlet installed. Could be very simple or more difficult depending on the location of your fuse box and where the wiring needs to go to get to the range location. Your fuse box needs to have space for the breaker. Generally it's good to have 200A service with a fuse box sized for that level of capacity.

    grapefruit1_ar thanked dan1888
  • 6 years ago

    It appears that I have some looking to do. I will surely check it out. I appreciate the info!

  • 6 years ago
    last modified: 6 years ago

    As Dan says, check for a 220v (a/k/a 240v or 208v) outlet behind the stove. Most gas stoves plug into a standard 120v wall outlet There might or might not be an existing 240v outlet for a stove, as well. If there already is one, check the amperage which you can find by looking at the circuit breaker in the houses's electric panel. The breaker for the stove circuit will have a number inscribed on it to show its amperage rating, which should be 40 or 50 amps.

    A 50 amp stove circuit has become a standard for newer construction and remodels but 40 amps was the standard for a very long time. (This is custom, not Code, at least where I live.) These days, higher-end and larger electric stoves often specify a 50 Amp minimum but it is far from the end of the world if your second home has a 40 amp electric stove circuit. There are are still hundreds of electric stoves models that specify a 40 amp minimum circuit. By way of example, the AJ Madison site lists over 200 electric stove models that are spec-ed for 40 Amp minimums and only about thirty five models that spec the higher 50 Amp minimums.

    If there is an existing outlet for an electric stove, you also should check to see whether it is for a 4-pin plug or a 3-pin plug. You will need to know this in order to know what kind of cable and plug to buy with your electric stove. (In the US, the plugs are sold as a mandatory accessory for electric stoves.) Three-pin was the old standard but four-pin (and a matching 4-wire cable) will be required if you have to add or upgrade a stove circuit. If your second home has an older 40 amp circuit, it may well have a 3-pin plug. Many electric stove models can be fitted with a 3-pin plug, but some may specify only 4 pin plugs for 4 wire cables.Best to check the intallation instructions while stove shopping.

    So, if your second home does not have an existing electric-stove outlet, then, as Dan said, you will have to install a suitable 4-wire cable, outlet and suitable breaker. That may be hard or easy depending on where the electric panel is located relative to the stove in the kitchen and whether your second home has 100 Amp or 200 Amp electrical service and whether there is room in the existing electrical panel to add additional circuits and breakers.

  • 6 years ago

    Thank you very much! I will be able to check this out over the weekend when I get there. The home ( condo) is 20 years old, so hopefully it has “updated” service. The electric panel box is not close to the kitchen, but I can take a look inside. I think it is possible that there was an electric stove in the home originally. If it turns out to be too much hassle/ expense I can simply get another gas stove, but I hope to get electric stove. I appreciate your input.