Software
Houzz Logo Print
anthony_berte77

Floor tile issues w/ contractor over lippage

5 years ago

I've been having some issues with my contractor. He's doing a full gut and remodel of my master bath & closet. He's having problems laying my 15"x30" porcelain floor tile. He laid it twice, and both times he decided on his own that the tile wasn't even and ripped it up and tried a third time. The tile in the pics is what I'm left with after the 3rd time. It's still very uneven with huge lippage. Contractor planned on moving on with the project until I said something. It is hard to tell in the pics, but walking barefoot (which I would be all the time) the lippage is blatantly obvious, not to mention sharp and uncomfortable. In the pics I've put blue painter's tape on all of the tiles where the lippage is extreme. There are about 20 tiles total that have excess lippage. I saw someone mention that you should be able to slide a credit card over every tile edge to the next. In my pic you can see I've stacked 4 cards high, and still couldn't get over the next tile. I also read here on the forums that large format tile in a brick pattern should only be offset up to 33%, not 50% as he's done. We briefly discussed tile pattern when he was demoing and I said I wanted brick pattern. We didn't discuss the offset and he didn't mention any possible issues.


I brought the lippage up to him right away after the 3rd time of laying the tile. He had been nice up until that point, but he got a bit frustrated. Said that nobody in this city could get it any better than that. Said that my floor just wasn't level (but he also claimed he was going to level my floor before he laid the tile). He said he will add more grout and that should fix things. I brought up the 33% offset issue, and he claims he's never heard that in 20 years of laying tile. He did use levelers on all of the tiles when he installed them every time.


He will be back on Monday to finish the grout and then finish the rest of the bathroom. I can't imagine that simply adding more grout will be a proper solution. He also had an apprentice in the bathroom grouting the shower tile and laying the floor tile inside the shower, and a vertical accent band down the far wall of the shower. I said that it looked awful and uneven, but he assured me that the apprentice didn't know how to properly grout (see pics), and once he came in and fixed it himself, things would look ok.


I'm on the verge of freaking out right now. I think my bathroom not only looks horrible, but it's functionally horrible as well. I can't even walk comfortably on my floors with the lippage. Am I just being picky, or is this really unacceptable work from a professional? How would you suggest dealing with this contractor? We didn't sign any sort of contract or anything that mentioned lippage.












Comments (18)

  • 5 years ago
    last modified: 5 years ago

    You will get many more helpful comments and I am no expert but that lippage is NOT ok. It also looks like the thinset has oozed out between the penny tiles which means there is no way they will be able to grout that correctly--the grout will not go into those joints and if it does, the thinset will peek through.

    I think you'll hear it's a do over, I don't know what recourse you have other than withholding payment, especially if there's no contract.

    Anthony Berte thanked Anna (6B/7A in MD)
  • 5 years ago

    Not acceptable.


    Is he an actual licensed GC? You checked his status on the state database? And verified his insurance? What are his qualifications to do tile? That’s a highly skilled specialty. Most GC’s should stick to project manage to and framing. And hire a real tile specialist as their subcontractor.


    https://www.ceramictilefoundation.org/homeowners-guide-to-hiring-qualified-tile-installer

    Anthony Berte thanked User
  • 5 years ago

    @User Haven't looked into licensing, but he is insured. I found his crew thru the Nextdoor app. They have tons of positive reviews from people in the community, and they post lots of their finished projects with pics. I really thought I had picked the right people. Tile and everything else always looked good, and he mentioned tile was his specialty, so I'm left scratching my head on this. Any idea what the issue could be and the best way to fix it?

  • PRO
    5 years ago
    last modified: 5 years ago

    How did your flood test drain and what did the plumbing inspector say about redgard?

    Any homeowners reading along?

    The TCNA sets the standards for tiling, lippage and all.. the best thing any homeowner can do is get a written contract with A detailed scope in writing.

    "All tile and tile related work to meet current TCNA, ANSI, UPC, and IRC standards and all MFG installation instructions."

    Now you have a way to fight the tile lippage imposters, hacky GC's that make poor sub decisions and you will scare 90% of the fake tilers right out your front door quickly.


    You will know when youve found a tile pro when they cite TCNA method numbers in their estimates.


    Hire wisely America

    Anthony Berte thanked Mint tile Minneapolis
  • 5 years ago

    Recently had a whole house of tile installed and the contractor used something called a lippage control kit.

  • 5 years ago

    @AJCN He used the spinning tile levelers on all the tiles. I think that's essentially what that kit is you're describing. It didn't seem to work.

  • PRO
    5 years ago
    last modified: 5 years ago

    He’s not up to the project. At all. He needs to remove all of that, and learn that lesson by hiring a more qualified individual. He won’t forget the lesson you force him to learn here. https://www.ceramictilefoundation.org/find-certified-tile-installers

    Just remember that neighbor recommendations to the positive come from—your neighbors. (Or shills, paid for reviews.) Your neighbors have different standards of acceptability. My neighbor, half blind Uncle Grandpa, sitting in his lawn chair with a case of beer, watching the cars go by, might pop in and look at just about anything and call it good. My tax attorney client, in the most expensive suburb in the area, uses a magnifying glass. She needs to chill, but Uncle Grandpa needs to put on his glasses and stop the beer before he looks.

    Don’t take neighbor’s recommendations without verifying things for yourself. Don’t trust pretty pictures, unless you can visit that installation and look yourself. Way too many of the skilled guys in tile groups find their pictures posted on Craigslist ads.

    Anthony Berte thanked User
  • 5 years ago

    How was the shower waterproofed? Do you have pictures showing the steps?

  • PRO
    5 years ago

    Ugh - Just ugh. I am sure there was paperwork with the tile stating that is has to be a 1/3 brick pattern or smaller with larger tiles. The shower floor doesn't seem right either. You should not be able to "see" the sheets of the penny tile.

    There are some excellent tile folks on Houzz... hopefully they will jump in!

  • 5 years ago

    @User I recently moved from Chicago to Savannah, GA and I've had the hardest time finding qualified tradesmen that do quality work. Sure enough I looked up tile installers from the link you gave me, and the closest one is an hour and a half drive from here in a much smaller town.

  • 5 years ago

    This is 'contractor' work. It is NOT a PROFESSIONAL TILE SETTER. You have hired a 'company' based on reviews....but that company CHEAPS OUT on TILE INSTALLATION.


    The GC 'thought' to please you by doing what you asked for with tile YOU purchased/provided to him/her (I'm guessing...please correct me if I'm wrong).


    The 'customer is always right' is what MOST of these 'guys' work with. If Jill Smith asks for 50% off-set for her large format tiles then THAT is what Jill will get...come hell or high water.


    A PROFESSIONAL TILE setter would have said, 'Sorry Jill but you will need 30% off set'.

  • 5 years ago

    It can be very hard to find qualified people in my area too; near Houston. It's like the wild west. No permits, not inspections, no required flood test, no nothing. The only way any inspection or flood test would be required is if the homeowner knows enough to put all that into the contract. Like knowing how to do your own surgery and putting it into the paperwork that you sign with the hospital. Ridiculous.

    The excellent tile pro I hired was on this site:

    https://www.tile-assn.com

    I also tried the other one posted above and didn't have luck in my area, but others have told me they have had luck. That site also has lots of info on it that is educational. Here's the link for the TCNA handbook everyone is referencing. You can buy an download version for about $40. It's about 600 pages, but you only have to read the introduction (about 50 pages) and the shower sections to get a good education. You can skip all the other chapters such as swimming pools, etc.

    https://www.tcnatile.com/products-and-services/publications/218-english-publications/188-handbook.html


  • PRO
    5 years ago

    Think that looks bad now? Here's a peek into your future if you accept that job:

  • PRO
    5 years ago

    Another observation. Fact - Minimum mortar coverage required in a wet area is 95%.

    Notice in your 5th photo with the vertical tile edge on pony wall. ZERO coverage is visible. You actually see a gap between the tile and substrate. Similar scenario on top edge of the seat. Also the substrate waterproofing is clean from mortar. Again clearly visible on the left edge of vertical penny rounds. Showing that the required keying in of the mortar (as stated on every bag) was not done to achieve a proper bond. The points I make are tile basics.

    How there is so much lippage on the 3rd attempt using a lippage tuning system is beyond comprehension.

    "Said that my floor just wasn't level"

    The maximum allowable variation for setting large format tile is 1/8" in 10'. That would be addressed prior and billed accordingly. Note; Flatness is what you are addressing here not level.

    I suggest you take up Hallett & Co.'s generous offer to assist you.

    Good luck.




    Anthony Berte thanked Creative Tile Eastern CT
  • 5 years ago

    Ballet is a long time member here. i would definitely take his advice

  • PRO
    5 years ago

    So to start this tile cannot be done in 50% offset and IMO any decent tile setter would know that , The tile size is abit odd but I would have done a stacked pattern . Those penny tiles ? Any DIYer would have done better and I would be curious about the proper waterproofing too. BTW when all those are ripped out all the waterproofing will pobablt need to be redone. by an actual liscensed pro.

  • 5 years ago

    Print out the instruction from the tile manufacturer before you meet with your contractor. The work is not acceptable, and no amount of grout is going to fix it - including the shower floor and penny tile!