Software
Houzz Logo Print
gabe_sellars

Underbelly for DIY Range Hood

5 years ago

We need some material for the bottom plate of our range hood. We have 4" maple molding (matches our cabinets) with cove to cover the outer frame and above the molding. We think we need metal or maybe wood (painted white or stained to match the cabinets) for the underside. Any suggestions would be appreciated!







Comments (13)

  • 5 years ago

    There was an oversight/miscommunication by our contractor, and us, and now we are in this predicament.


    The hood is a Zephyr 30" Vortex AK9028AS Insert with a 390 CFM blower that's properly vented out the back of the house. We have an induction range, not gas. The item you linked is 400 CFM. Was that your recommendation?

  • 5 years ago

    I recently researched and purchased a new range hood. JuneKnow is correct-- the cheapest ones are the ones that are open like that. which means you might also suffer from poor performance. it is not worth the cost of trying to make it look better.

    just find a new one that fits and is good quality. is this miscommunication your contractor's fault? if so, make them swap it out for free. they can provide you the measurements so you can research hoods and find the right fit.

  • 5 years ago

    as far as CFMs go-- it's not just about gas vs. induction. there are minimum requirements so that gas fumes are safely whisked away, but the thing is cooking also produces smoke, smells and oil. not wanting a smelly house or gross oil buildup in the kitchen -- that's why some people go for more powerful vent hoods, even if they have electric or induction.


  • PRO
    5 years ago

    Ugh - this will be a bit difficult because you also have the backsplash installed.

    I would try to find a metal shop and have some stainless cut to fit. It would need to be thin enough to tuck under the lip of the vent insert - something like this


    Good luck

  • 5 years ago
    last modified: 5 years ago

    I used a Broan 390cfm insert, around $200, and made my own surround. No make-up air needed and it's sufficient for my electric range. If you look it up on the site which starts with 'A' and ends with 'mazon', you can find the liners. I built my own liner with 3/4" plywood, and lined it with metal flashing. It's held in place with angle iron, so no wood is exposed.

    Is the black strip the controls?

  • PRO
    5 years ago

    I am under the impression that since this had been built and framed in with 2 x 4' and the backpslash is installed, getting a different insert is not going to help. It still won't cover that 2 x 4 construction and in my opinion, you can't paint that.

    Maybe there is something I am missing??

  • 5 years ago

    Here is the final product for anyone curious

  • 5 years ago

    That exposed wood underneath needs to be covered with custom sheet metal. It won’t survive a year’s worth of cleaning off the grease. And is a dangerous fire hazard.

  • 5 years ago

    Fan should be forward for lighting and reaching the controls without reaching across heat.

  • 5 years ago

    good lord people, this is an induction range.

    I used to have a wood shelf above my electric range for about 4 years, and we cook a ton. there was a light at the back underneath the shelf that we had to reach across to turn on. we never inadvertently burned ourselves reaching for it, and it never got hot enough under there to ruin the wood.

  • PRO
    5 years ago

    ILoveMod -- I wonder if you have ever had a grease fire on your electric range, induction range, or gas range. Such fires can easily leap all the way up to your vent hood and are the most common cause of commercial restaurants burning down. Residential building codes and UL listings are not based on your particular experience. They are based on the statistical experience of millions of residential homeowners, over time. Consider also that your competence to safely reach across a hot pot of tempura oil, to turn on a switch, will differ from that of a much less experienced person or an elderly person. You probably have the sense to make sure water is not dripping from your hand into the oil, but a sixteen-year-old distracted by TikTok may not. Some may be shorter than you and may not have your balance and motor skills, due to aging. I hope you manage to navigate life without serious injury, but you can improve your chances by not ignoring building codes.😉

  • 5 years ago
    last modified: 5 years ago

    I was referring to the comments about scorching, or "reaching over hot areas" to get to the controls. I doubt that's going to be an issue here.

    you make an interesting point about grease fires, but that was not what I was trying to argue. personally, I really don't think it's that real of a threat here, but why don't we let the OP do their own research and decide?

Sponsored
The Creative Kitchen Company
Average rating: 5 out of 5 stars52 Reviews
Columbus Area Kitchen Remodeling and Refacing Professional