Software
Houzz Logo Print
judy_anthony15

Vinyl sheet flooring underlayment/subfloor

5 years ago

I’m in the process of choosing a better quality Armstrong or Congoleum sheet vinyl. It will be installed in an old home after the existing linoleum and vinyl are removed. The flooring underneath is unfinished wood planks (see photo). About a decade ago we had removed linoleum and installed vinyl in the bathroom over a quarter-inch plywood subfloor. Unfortunately, water got between the area where the tub and the floor met, and so now that has to be removed. Even before that happened, the floor seemed squishy with just the quarter-inch plywood, causing it to gap away from the tub. How would I know what thickness plywood or what other underlayment is best under either Armstrong or Congoleum? They seem to leave that up to the installer. Has anybody had experience/problems with their plywood subfloors under vinyl sheeting?



Comments (5)

  • 5 years ago

    Sheet products don't need a thickness. They need FLAT. The understatement will also allow for separation between the old black ?glue? And the new adhesive.


    Is the house o!d enough to have asbestos in it (mid '80s or older)?

    Judy Anthony thanked SJ McCarthy
  • 5 years ago

    There are a few things to follow for plywood underlayment with glue-down sheet vinyl (which Linoleum, Congoleum, and other brands are all considered).

    The main priority is that it be APA rated, which means that it can take the glue (many use cheap lauan which is not suitable). Another priority is that it is fastened properly. The thickness is determined by the condition, levelness, and stability of your existing subfloor. The gap at the tub will be present with any flooring you choose, where the caulking must be properly installed and maintained. Your old house may have more movement and humidity changes that exacerbate that gap.

    APAwood.org is the go to for underlayment.

    Judy Anthony thanked 3onthetree
  • 5 years ago

    Thank you. What considerations are needed in “fastened properly”? Also, how do I know whether the vinyl should be laid perimeter fastened vs full adhered vs loose lay install? This job is in a small town with not many Flooring company options. Since the previous job was botched, I have trust issues. Thanks!

  • 5 years ago
    last modified: 5 years ago

    The bathroom I would want fully glued for sheet vinyl. From what I've seen with floating installations over wood in rooms that don't have extreme humidity changes, I would expect some bubbles whether "perimeter" or "loose lay" in a bathroom.

    I would suggest looking at the vinyl planks - LVPs - waterproof selections like Lifeproof at the orange store. Sheet vinyl has a foam layer, where LVPs are solid and thicker. Your unit cost is much higher but for a small bathroom doesn't equate to much in the end.

    Here's a snippet from APA on underlayment:



  • 5 years ago

    Thanks again. The installer said he'd do fully-glued, and during my conversation with him, when he mentioned ”luan” I quickly told him I wanted APA-rated plywood...thanks to you.