Software
Houzz Logo Print
webuser_12707111

Interior lighting on stone pillars? HELP? Mood lighting.

5 years ago

Lighting can make a room, but I’m struggling to find a good way of lighting up the stone pillars at night (dimmers) in our future living room.
The wood beams rest on the stone pillars, and I do not want lighting into the beams. .
We have sconce lighting on every OUTSIDE pillar (stone pillars go from the outside to inside)... so trying to figure out another way to bring light to the stone and Accentuate the texture.

Has anyone tried the lights that go into the floor?
Our floors will be polished concrete.
Any ideas for options?

Comments (13)

  • 5 years ago
    last modified: 5 years ago

    "I do not want lighting into the beams"

    I assume this means that you don't want to install lights in or on the beams but that lights can incidentally illuminate the beams from below.

    Pure Edge Lighting offers fixtures that can be installed in an electrical box embedded in the floor though they are not cheap.

    For outdoor lights, here are Dark Sky guidelines:

    "To minimize the harmful effects of light pollution, lighting should

    • Only be on when needed
    • Only light the area that needs it
    • Be no brighter than necessary
    • Minimize blue light emissions
    • Be fully shielded (pointing downward)"

    Source: International Dark-Sky Association

  • 5 years ago

    I think you want down lights -- they could be freestanding, like track heads used for art, or recessed, like eyeballs. They should be able to wash the surface of the pillars dramatically -- I'd put them on dimmers so you can tailor the effect...

  • 5 years ago

    @acm yes I do agree- pointing downwards is ideal . So maybe I could make certain lights on the ceilings (red circles on photo) be directional. And could direct these lights at pillars (once’s I highlighted).
    Do you think this would work? I’m sure they have flush mount lights you can direct .
    I’m just do not want any lighting drilled into the wood beams (wood beams go from outside, all the way through house and are the red dashes on diagram). These wood beams rest on stone pillars.

  • 5 years ago

    That won't work. First, the recessed lights are too far away from the stone columns. They must be close to emphasize the texture. Second, if you use recessed lights with narrow beams, at best you'll illuminate spots on the columns (like shining flashlights at them). If you use recessed lights with wide beams, much of the light will shine out the windows. The lights must have a narrow beams and line up with the columns.

  • 5 years ago

    @wdccruise well- shoot. Sounds like my only two options are putting lights directly into the beam (which I refuse) or a simple light on the stone pillar itself 🙁

  • 5 years ago

    So think I’ve come to a better solution (with all your help) . How does this look?. To only have 4 beams with minimal sconces on them (highlighter spots on paper).
    This way it still brings some mood lighting to the area but not overkill will sconces on every single stone pillar (as on the outside every stone pillar does have a sconce on them).
    ??? Thoughts??

  • 5 years ago

    "4 beams with minimal sconces"

    I thought you didn't want to attach anything to the beams. Perhaps you mean attaching sconces to the stone pillars. Lights from the beams would, I think, provide more even lighting of the stone walls as shown in this picture. Stones adjacent to sconces would necessarily be might brighter than those above and below. (But I'd probably attach sconces to all six pillars assuming they were controlled with dimmers.)


    Portfolio · More Info


    I don't see a reason lighting the outside stone pillars. They serve no function, it appears, and if the lights shown outward or upward they'd just contribute to light pollution. They'll be visible to you and passersby 16 hours/day without artificial lighting.

  • 5 years ago

    Can you put lighting in the floor? is this new construction? I would be shooting light up not down, have to be a really narrow beam to get to the top of the pillar. They are called well lights and would be put right into the floor.




  • 5 years ago

    @RL Relocation LLC: "I would be shooting light up not down"

    That photo demonstrates why you can no longer see the stars.

  • 5 years ago

    @wdccruise Yes that covered patio is really going to cause problems for the stars .....

  • 5 years ago

    @RL Relocation LLC: "Yes that covered patio is really going to cause problems for the stars ....."

    Says the woman who posts a picture in which no stars are visible to the viewer due to gratuitously overlit garage doors.

  • 5 years ago

    @wdccruise can you send private messages over trying to consume someone's thread, please.

  • 5 years ago

    @wdcruise oops- I meant sconces in the stone/brick pillars NOT the wooden beams at the top.
    I know for sure I do not like the look of lighting recessed in wooden beams .
    As for the outside stone/brick pillars- I’ve always loved the look of lighting on those - and at night will look amazing.

    I guess sconces on the inside ones won’t be so bad . Initially I was hoping to have no lighting on beams or pillars but after reading comments - there is no way to really do this well other than lighting from the ground up-
    And I’d have to look into this much more.

    If I find some super minimalist sconses - it should look good .