Software
Houzz Logo Print
webuser_978169935

Sirius Built-inseries SU909

5 years ago

Hi everyone

I am in a dilemma about which range hood insert to get for my new kitchen. I do a lot of ethnic, Asian and Indian cooking. With an open concept kitchen it is important to get a powerful range hood. My cabinet lady is recommending the Sirius Built-in Series SU 909 as it fits comfortably with the design.


It has 1100 CFM, 66 dBA/5.1 sonnes and an aluminium dual motor housing. I am not sure what the dual motor does or is it a good thing. Has anyone had this before? And are dual motors nice to have?Thanks.

Comments (4)

  • 5 years ago

    Jyo, I am just going through this right now - I started a thread which I'll link, hopefully Houzz will not object to that, and there are many many others on this site. There are folks who drop in and comment who are very knowledgeable, sometimes so smart I cannot even understand them! (I did take physics but greatly preferred the falling-rock curriculum to the electricity stuff)


    Anyway. The trouble I see with that hood, which looks nice, is that it has no height inside. When you are wokking or searing and cause a huge plume of stuff to come up off your cooktop, the hood often cannot keep up, even if it is a powerful one like that. So it is good to have some space inside the hood for the fumes to sort of pile up, lurk and wait their turn to go up the flue. There are not too many hoods for residential setups that have good "capture volume" as they call it, but there are some.


    Also this hood has my pet peeve, the light bar in front. Doesn't look like the hood is as deep as the cooktop anyway, plus the lights take off another few inches of depth which means it's really only pulling air from over the back burners. I have a hood like this right now and it does fine for the back but not much for the front. And as I age, the ergonomics of cooking on back burners become less tenable!


    Good luck on this!


    Hood selection thread

  • 5 years ago

    Thank you so much! This is helpful. You're right about the height and I had no idea about "capture volume" but I thought the dual motor might help blowing it out..or doesn't it? Would you have any other brands to recommend?

  • 5 years ago

    Well if you look on that thread there are several hoods that actually are designed to be wall-mounted and are not inserts. Decent capture. There was a suggestion to just build a surround for them, but for me that was too much $$. I'm getting a Prestige. Vent-a-hood makes large-volume hoods and there is a whole lot written about them on these forums too. Just do some searching and see what you can find.

  • 5 years ago

    I went through your thread..thanks for the sharing. Unfortunately the cabinet design only permits hood inserts. It's an old house with low ceiling so I am limited on height. Do you know if the dual motors in the hood insert will help with moving the air out? I mean compensate for the capture volume?

0