Software
Houzz Logo Print
amanda_rt

Wood table repair help!

5 years ago

Hi! i just purchased this table and of course got a huge discount because of the marks/scratches.. is there anything anyone can suggest to repair it? wood markers?




Comments (13)

  • 5 years ago

    Tell me what was used for finish on the table and I will give a details on professionally repairing it. Without knowing finish,try MinWax pencil or Frombys tung oil.

  • PRO
    5 years ago

    @klem1


    How would someone that has purchased a table like this determine the finish?

  • 5 years ago

    Simply asking at the seller is how most people determine the finish. This piece was likly new since it was discounted. Mfgrs paperwork attached to furniture often say's what kind of finish and how to care for it. I attach finish information to everything I build. On pieces with custom or unusual finish I include maintenance reccomendations. Lacking information from mfgr or seller,an experienced finisher can figure it out if you ask and pay for the service. If piece isn't worth the effort Formbys and MinWax offer band-aids that some find exceptical. What prompted you to ask?

  • 5 years ago
    last modified: 5 years ago

    Since it looks like it's solid wood and thick, and those gouges aren't very deep, I'd spend a couple of hours with my random orbit sander or a belt sander and simply sand down enough to make all the damage disappear. Then give it a new finish. You'll want to sand the whole top to keep it flat and so that the wood uniformly accepts the new finish.

    To me, it's too nice a table to settle for half measures, like markers and repair sticks, which will inevitably still show the damage.

  • PRO
    5 years ago

    I agree with kudzu. To get it done quicker, I would use a belt sander with 120 grit paper be first, then go with an orbital or vibrating sander to get it smooth with 150 grit, then you'll be ready to put a finish on it.

  • PRO
    5 years ago

    I'll suggest it's book matched veneer, and guess the OP lacks sanding equipment.


    Amanda -- what does the underside of the table top look like?




  • 5 years ago
    last modified: 5 years ago

    PPF-

    You could be right. I was going by the fact that it looked like the table grain continued onto the end, but that could be done with veneer. Close examination of that slightly beaten up corner might reveal if there is substrate peaking through...and also reveal the thickness of the veneer if that is what it is. If it is veneer it still might be possible to safely sand out the damage as it isn't very deep, but it would have to be carefully done.

  • 5 years ago

    Looks like veneer to me too. It’s possible that Restor-a-finish might do a decent job of hiding the damage.

  • 5 years ago

    @klem1 @PPF. @kudzu9 @party_music50 @CLC Construction

    here is a description listed on the website. im not handy and neither is my husband so best easyish solution please!! thanks everyone :)


  • 5 years ago

    Amanda,that information is exactly what I need to help you with a simple but atractive, long lasting solution. However PPF's sniffing, leg hiking and weird questions are distracting so I'll wait until hopefully he moves on. Meanwhile just injoy the table and don't get near it with a belt sander or Pledge Furniture Polish.

  • PRO
    5 years ago

    However PPF's sniffing, leg hiking and weird questions are distracting so I'll wait until hopefully he moves on.


    @klem1 Don't hold back on my account -- I'm here to learn too.

  • PRO
    5 years ago

    I'm with the folks pushing refinishing. It looks like a very nice table and should be worth the work. When I'm refinishing I generally use 150 grit to remove the existing finish or use a finish remover and then use the 150 grit. Next I would suggest 220 grit and to finish it off and really burnish the wood surface I would suggest triple 000 steel wool. Using the steel wool give the wood a luster that sandpaper alone doesn't. Not sure if your table is stained or not but would suspect that it would look great with a rub-on polyurethane finish. Good luck!!