I am not understanding the result. I recently remodeled with an undermount sink in my bathroom and there was no problem installing a faucet with "standard" measurements on the counter. I provided the specifications for all the fixtures and presumably all of that was worked out by my GC, designer and the counter fabricator/installer and plumber.

That said, I checked the "reach" of my faucet out of curiousity and it was about 5 1/2" but the company I got my faucet from does seem to have faucets that have a longer reach - e.g. - 6 3/4".

Phylrich is an American brand and they are manufactured in Southern California. They were easy to deal with and I have had no problems at all with them - I have shower fixtures as well from them as well as some accessories like toilet paper holders.

Phylrich Bathroom Faucets

Thank you for the response. For whatever reason, the center of the faucet to the edge of the countertop where the sink begins is about 3". You can only feel about at most 3/4" clearance between the faucet hardware and the edge of the sink underneath. I have only found 2 faucets so far that are over 6" and one is the wrong metal. I will definitely look into Phylrich ~ thank you!

Phylrich does all of its fixtures in about 14 different finishes so unless you have an extremely odd finish I am sure they have the "right" finish.