I had this quarzite counter installed today. at first i thought the seam looked fine but now i notice a bleed around the seam. Im sick about this!

You need to call the fabricator back. It’s his resposibility to fix that. Ask him what product he used on the seam.

He should have used Glaxs adhesive. It doesn't bleed. And a Seam Phantom.

Thank you. Can it be remedied? Can it be removed and re seamed with the products you mentioned?

Depends upon your layout as to how cost effective the fix is. Post a dimensioned drawing including walls and I'll do my best.

The seam is on an island. There are no walls and there is an overhang all around the island. Would really appreciate your thoughts. i see you are based in Sarasota. We are in Bradenton.

"Post a dimensioned drawing including walls and I'll do my best."

Dimensioned drawings, not just pictures.

i tried to post pics earlier

but i dont see them. trying again.

The seam is at the point to the right of the sink.

Lucky you. I'd clamp a Festool fence to the top and rip it apart dust-free, then tint the Glaxs adhesive to match and pull it back together. Tell him that's what you want done or you've got a guy that will do it for 3K. You're not an hour away.

Joe, the fabricator says he can fix this. We will see. Thanks for your help.

Can't wait.

Any updates?