Software
Houzz Logo Print
lauriezim

Chair is too deep

4 years ago

I just bought a chair that's difficult to return. I like it, but it's way too deep. (I'm short.) Would it work to buy a large pillow for it? Any other ideas? I also don't love that there's a space between the back and the armrest. (That's because it's a recliner.) Any advice?


Comments (8)

  • 4 years ago
    last modified: 4 years ago

    Lumbar pillow.


    Ellis Residence · More Info


  • 4 years ago

    lumbar pillow or heftier pillow you can rest against.



  • 4 years ago

    You need to be arithmetic about it, and it works best if you get help from someone with a yardstick or retractable tape measure.

    Sit on the chair with your feet on the floor and your back very straight.

    Have your helper measure the distance between your back and the back of the chair in the middle of the back of the chair.

    That distance is what you need to overcome.

    Since you are not going to grow any taller, pillows will have to suffice.

    Lumbar pillows will not do the trick, since they will only take up the distance at your lower back (lumbar section) and the rest of your back will have no support whatsoever and you will be in pain rather soon.

    So the other distance you need to measure is the distance from the seat of the chair to almost your shoulders.

    Your helper can do this too.

    The odds are, no pillow you buy will be firm enough to support you, at least not for very long.

    Especially if you have a bad back.

    What you want to do is go to a place that sells foam and get a piece of foam that is high density, extra firm.

    You have to see what the store sells. If they sell 6 inch thick foam and that's what you need, marvelous. It's expensive, but it makes more sense than getting 2inch foam and making up three pillows.

    Depending on the thickness they sell, you need to figure out how many pillows you need to make up the distance between the back of the chair and your back, and then you have them cut the foam to the height you measured from the seat of the chair to just below your shoulder and horizontally a good width would be from one elbow to to other while you are seated and your arms are bent, around 26."

    Then get some batting for around the foam, then a muslin cover. Then a fabric cover that zips off and is machine washable, dryable and permanent press.

    And make a few extra covers, because there is a monster in some washing machines.

    But do yourself a favor, go to a seamstress or upholsterer and let them do it, unless you know how to sew. if you are getting machine washable fabric, wash it first and put it in the dryer to allow it to shrink as much as it needs to before it is sewn.


  • 4 years ago

    Decorative bed pillows are often much larger than sofa throw pillows. I would try looking for two large square pillows in the bed section of a place like Home Goods or TJ Maxx. Make sure they are returnable and get a bunch of different ones to try out at home.

  • 4 years ago
    last modified: 4 years ago

    A lumbar is great at supporting the lower back but won’t force your body forward. I’d look for a square cushion cover, add form and stuffing to get the exact firmness you want. Found this site and thought the cushion design and size would work really well with your chair.










  • 4 years ago

    I use this pillow from Target for the same problem. It’s 26” square and pretty firm. A well stuffed pillow that’s large and thick enough may work for you.

  • 4 years ago

    Return it, despite the difficulty. Additional pillows will never make it fit as well as a recliner designed for a short person. Alternatively, give it to a larger person and buy a new "Goldilocks" recliner just your size.

  • 4 years ago

    I had the same problem with one of my chairs. A lumber pillow is half of the solution. I also use a low footstool (7” high) and the combination makes the chair just right. I am able to tuck the footstool under the front of my chair when it's not in use so it's not a trip hazard.