Software
Houzz Logo Print
clara_hayles

Design help with a new build

4 years ago

Has anyone used an interior designer for new construction lately? How much was it? What all help was provided?

Comments (7)

  • 4 years ago

    5-20% of the build costs for flat fee, depending on if you are really looking for design work input, or just decorating the end result. The two services are not the same. Plus the cost of the furnishings added to that, managed and installed by the designer.

  • 4 years ago

    I'm basically looking for someone to work with the semi-custom builder to build the house the way I want it. AND then helping me with decor after it's built.

  • 4 years ago

    Exactly what kind of help are you looking for.


    I did a gut remodel but it wasn't new construction. I had a designer and a GC. My desgner knew quite a bit about construction as she had worked with a builder at an earlier point in her career.


    The cabinets and builts in were all custom from a local cabinet shop - for example. So she designed with input from me of course. Obviously all of the finishes, flooring, wall paint, fixtures, tiles including designs.


    She drafted the very specific plans that were submitted to the City in order to obtain permits as well as to send out to GC's for bids.


    And then furniture and what people think of as interior design.

  • 4 years ago

    Thank you WestCoast Hopeful. One designer just quoted me $30k for a $700k house. That seemed a little high. No doubt they would have done a good job but $30k can pay for a lot of upgrades.

  • 4 years ago

    I think you also need to know your market. What is fair where I live is irrelevant to your search in some ways. Also 30k and includes furniture help seems more reasonable. Lots to consider

  • 4 years ago

    You want 2 separate services.


    Service 1 is the coordination of a limited number of available builder finishes. Help with that depends on the limitations, your decisiveness, and any negotiating that is needed to get the builder to go out of his box of samples. 4-10K for that, depending on how long it drags on, and number of decisions involved, and square footage. 1-3 Days for a ”Designer by Your Side” type of service.


    That’s zero suggestions about the floorplan, or help with that, (that is likely needed) because the builder won’t allow changes. If the builder allows changes of the plan from your designer input, thats a whole new, and more expensive, category of work.


    Service 2 is furniture and flow space planning your new build home layout, inventorying your existing furniture as suitable to work in the new space, and and creating concept designs for all of that, and then identifying materials and specific choices to fit the approved concepts in a FINAL design, 30K would be low for a whole home. That should be 7-10K per room, plus the cost of the furniture and accessories. A ”name” designer would be double to quadruple that.