For a framed unit there should be a slot for a slide in wipe like this.

Thanks @millworkman. There is not. If there ever was, it has not been there for many years.

Take a picture of the bottom of the door the slot should be there to install the sweep posted above

There is no T-shapes groove.

Look on the underside of the bottom rail. Is would not come thru on the vertical door stile.

I did look at the bottom. The metal comes down a small amount further than the glass, but there is no T shaped channel.

How thick is the Door Glass and how thick the frame?

That will not work. That is a sweep or a wipe for a frameless door.

There are lots out there. What is your solution if there is no slot? lol

@Stax - I did try to one you posted first - Millworkman is correct. It didn't fit. I did order one similar to the second one you posted. Fingers crossed. (but darn, over $50 with shipping!)

Cheaper Alternatives