Software
Houzz Logo Print
webuser_29405466

Help choosing apron front stainless sink?

4 years ago

This will be my main clean-up sink. I was leaning toward the Kraus KHF200, but I wonder if the curved front is a problem for any reason. I think it's about 1/4" deeper than a flat front, so I'd be that much farther from the sink. Also, of the three options, that one has the smallest bowl space by an inch in each direction. But, at 33" inside width, it's still pretty big.


If a flat front is better, the Kraus workstation is flat. I don't need most of the accessories b/c this will be a clean-up sink more often than a prep sink, and it looks like it could be harder to clean the edges where the accessories are supposed to rest.


The Kohler is twice the price of the Kraus sinks. Worth it? That's the one the KD suggested (but they won't get a commission on it b/c I'd be buying it through the builder). The Kohler has a larger bowl front to back but that alone isn't worth the extra $400!


I know I need to check these out in person, and I will, but would appreciate guidance.


The Kraus 36" curved apron sink:

https://www.kraususa.com/media/catalog/product/documentation/KHF200-36-Spec-Sheet.pdf

The Kraus 36" workstation sink (it has a flat apron): https://www.kraususa.com/media/catalog/product/documentation/KWF410-36-Spec%20Sheet.pdf

The Kohler Strive 36" flat apron sink:

https://www.us.kohler.com/webassets/kpna/catalog/pdf/en/K-5415_spec_US-CA_Kohler_en.pdf

Comments (5)