Software
Houzz Logo Print
erinlea88

Kitchen Backsplash Help!

4 years ago

I am struggling how to handle the backsplash on the window side of the kitchen. I am planning to use the same countertop material as backsplash on the stove side. Should I do no backsplash on the window side? Same height as stove side? Or 4 in. backsplash? Thank you!



Comments (7)

  • 4 years ago

    Your hood is shown as being mounted way too low, assuming you have 18 - 20" for backsplash height.


    For backsplash on window wall, you need something there. Either same height as base of upper cabinets or just a 4" strip. There isn't just one way to do it.

  • 4 years ago

    I agree with chispa. That range hood is ready to bump your head a dozen times a day.

  • 4 years ago
    last modified: 4 years ago

    Your hood installation height needs to look more like this ...

    Kitchen · More Info


    Interiors, Architectural, and Real Estate Photography by Bart Edson · More Info


  • 4 years ago
    last modified: 4 years ago

    You do need a backsplash there to protect your cabinets, but I would take it up to the base of the window if you can. And ask them to make you a little window sill shelf too.



  • 4 years ago
    last modified: 4 years ago

    Just regarding the comments above about range hood height. The ideal height should be a distance between the cooktop and the bottom of the hood between 30"-36".

    Regarding backsplash at the window, I agree with @chispa.

    I also would want to know what material you meant when you said "the same countertop material as backsplash on the stove side". I am asking because if it is Quartz, it should not go directly behind the range. It will scorch from the heat of the range. The Quartz manufacturers' warranties exclude damage from being too close to a heat source. So if you were planning Quartz behind the range, you could instead install a backguard for the range, or a stainless steel panel there.





  • 4 years ago

    It depends what your counter top material is and how loud/busy it is


    If it'll be a material that will create more contrast with the lighter walls and window sill/trim like granite that tends to be busy maybe following the height of the backsplash under the last cabinet and taking it across would work.


    If it's a simple clean and pretty material like the quartz pictured I personally would enjoy taking it up the whole wall (assuming you don't have tall ceilings and your cabinets are to the ceiling) if so this could work if not best choose a cut off point keep the idea of flow in mind

  • 4 years ago
    last modified: 4 years ago

    what do you like? It's perfectly fine to do the countertop backsplash on the stove side, and then do a simple tile all around the window. or even halfway.


    But the best advice anyone can give you is to wait until everything else is in, and then decide. (unless you want the countertop for the window area too.

    what kind of counter are you using?

    Is it quartz? depending on the range, you have to be careful w/using it behind burners.

    Is it plain or busy?

    BTW, I'd seriously consider doing a custom vent hood and nix that SS one w/the cabs overhead you'll never use

    do a hood/vent cover like this. the strip of wood adds some warmth too.


    here's a kitchen almost like yours. w/that SS vent. (I just think it cheapens the look) they used the countertop for the backsplash and carried it around the window, even w/the cabinets.





    another hood example. and a window like you have. personally I like the tile. but you could use your countertop backsplash on that one area and do a nice tile around the window:







    same quartz all around the window




Sponsored
Haus Studio
Average rating: 4.8 out of 5 stars28 Reviews
Franklin County's Preferred Custom Cabinetry & Design Studio