Software
Houzz Logo Print
matt_vanderstaay48

Help! Discoloring on limestone pavers.

4 years ago
last modified: 4 years ago

Hoping for some wisdom here. We had limestone pavers installed in our patio, and we found out that they didn't seal the pavers when installing. We ended up with lots of grout Haze, and the installer tried to power wash and even use some acid to clean it up. The acid made its own marks which we power washed again.


Edited: Originally I thought the issue was just grout Haze and picture boxing, but after I washed the pavers, I realized the issue is more widespread than that. I have a large amount of discoloration, where the pavers have gone from light grey to a blotchy dark gray with hints of brown. This is only happening on the pavers which are mortared in, I have a few that are laid on sand which have not exhibited this issue. This has happened over the period of 3 months. I'm attaching a bunch of pictures to show what is happening, I'm hoping for some wisdom from this group on how to repair/fix the issue, or at least understand what went wrong.


Picture Boxing around darkening (originally thought due to grout color absorption):



Non mortared stone (with the hole in it) next to the mortared stones, non-mortared stone has close to original color:



Color change is blotchy in places:




Area installed a few weeks later that isn't mortered, close to original color:



Comments (7)

  • 4 years ago

    Unfortunately, I don’t have any advice for you - I am just interested in reading the responses/advice you receive because I am having some issues with a new paver patio. A few of the pavers have white areas similar to in your photo - but I believe it’s efflorescence. My patio doesn’t have grout (mine has polymeric sand) - so, no grout haze.


    I’m meeting with my landscape design person (not sure of the correct ”title” to use - he is the owner of the company) this week to go over a new project. If you haven’t received a solution prior to then, I’ll show him this post/photo and see if he has any advice.


    I know how disappointing/frustrating/upsetting it must be to spend money $$$ on a new limestone paver patio - and end up with issues related to installation. I’ve been through renovation hell related to my master bathroom (lots of $$$ spent on nice Carrara Marble tiles in addition to all the other materials + labor expenses). I truly wish that I had never decided to renovate that bathoom.


    Hopefully, you will receive some helpful advice. HOWEVER, you need to be careful about taking any remedial action before you find out what statutory remedies you have against your contractor in your jurisdiction. Depending upon which state you reside in, the applicable statute(s) may require that you give your contractor an opportunity to remediate the issue in order for you to have legal recourse against them in the event the issue cannot be easily fixed.


    Let me know if you’d like me to ask my guy when I see him. Good luck!

    Matt VDS thanked dani_m08
  • 4 years ago

    Thanks for the tip about the contractor.


    I realize now that my issues seem to be more widespread, I thought the pavers where just dirty but I tried to wash/lightly scrub them and realized that I have a lot of color change happening. I updated the post with additional pictures to try and figure out what is going on here and how to fix it.

  • PRO
    4 years ago

    Limestone is very porous calcium carbonate. Unmetamorphasized marble. Softer, and easier to etch and scratch than marble. It is not a good choice for anywhere that has freeze thaw cycles. Because of it's porosity, it is also subject to acting as a sponge, and wicking water up through it. The water evaporates, leaving dissolved minerals behind. This is known as efflorescence. The usual cure to efflorescence is acid washing to dissolve the minerals. However, as this is limestone, acid will eat away and dissolve the limestone as well.


    A better choice would be 2 cm porcelain pavers in a stone look alike. I'd suggest Daltile Dignitary. You will still have issues with the grout and efflorescence. But that is a lot easier to deal with than the entire installation being subject to it.

    Matt VDS thanked User
  • 4 years ago

    Given I already purchased and installed the limestone, switching materials isn't an option. What I'm looking for is information on how to properly repair or where the errors were on installation that led to this issue happening. We have no freeze/thaw here (california), so not worried about that.


    Also, pictures I have seen of efflorescence on limestone before are usually lighter in color, my pavers are becoming darker / slightly brown in tint in blotchy locations as shown above. Are you saying this is also efflorescence? If it is due to rain absorption, then why would the pavers not set in morter not have the same issue, they were exposed to the same weather/elements.

  • 4 years ago

    Install was base rock, covered with concrete, then laid with mortar. So there is no real drainage underneath, but also shouldn't have water seeping up either.


    Could this be the moisture from the mortar? This affects the patio pretty evenly and it's a large area, so I don't think it's due to overspray from sprinklers or anything.


    The pavers still haven't been sealed, if I use a penetrating sealer on this while it's doing this, will it lock in the moisture, I'm worried it will get stuck like this.

  • 4 years ago

    I'm not a pro or anything, but I do have limestone pavers as my pool decking. Mine are a white color, but they do darken some when wet. Almost like yours look, but white.


    When I see people asks similar questions on here about their marble tile in showers, etc. the answers usually suggest the mortar isn't dried or is getting wet somehow.


    What is under the pavers? That may lead to your answer. Like PP mine has polymeric sand instead of grout, and it all dries in the full sun fairly quickly. Since your pavers without grout appear to be the original color and the grouted ones have the change, seems somewhat obvious it has something to do with the grout, what that is IDK.

    Matt VDS thanked justcallmepool