Software
Houzz Logo Print
joanna_lopes

Swapping freestanding range for slide-in range - granite gap

4 years ago
last modified: 4 years ago

I'm considering purchasing a GE Profile slide-in double oven gas range (Model PGS960YPFS). I currently have a freestanding gas range and a 4" granite backsplash, so if we switch to a slide-in there will be a 30" long gap in the granite. I do not want to remove the existing 4" granite as part of it is on the cabinet around our refrigerator. Has anyone used something similar to this to fill in the gap? https://www.homedepot.com/p/Inoxia-Dado-30-in-x-4-25-in-Stainless-Steel-Backsplash-BSPD-S/205326450


I do not like the look of a stainless steel panel behind the range that goes all the way up the wall. This is what the space currently looks like, but we are removing the microwave and cabinet above it and putting a wall mounted hood there.


Are there any low cost alternatives that won't look terrible?



Comments (19)

  • 4 years ago

    I looked at the photos that accompanied customer reviews on the Home Depot and Lowes websites. I thought that the product looked fine except in cases where the gap between the existing pieces of backsplash was wider than 30". In those cases, there we gaps between the new metal backsplash and the old backsplashes on either side which made the solution, well, less than optimal.

  • 4 years ago

    Yes I saw those as well and that looks pretty bad. My gap is exactly 30".

  • PRO
    4 years ago

    By "gap in the granite" do you mean the space between the back of the slide-in and the backsplash? Is there any splash above the backsplash or is it full height please?

  • 4 years ago
    last modified: 4 years ago

    The width of the new range won’t pose a problem? I’d think it’d be narrower than what you have now.

    Anyway, regarding the backsplash: If I’m understanding the situation correctly, you’re not willing to damage the fridge cabinet, right? If so, then I think you only have one option that won’t look weird:

    • remove the 4” granite riser entirely and install a tile backsplash all the way around thereby concealing the damage done to your fridge cabinet

    If you’re willing to, though, I suggest this route:

    • remove the 4” granite riser entirely, have the damaged fridge cabinet repaired and install tile on the walls only


    Can you post pictures of the fridge cabinet and the range wall?

  • 4 years ago

    @Joseph Corlett, LLC I meant the 4" high granite backsplash that is not visible since we have a freestanding range right now. I added a photo to the post.

  • 4 years ago
    last modified: 4 years ago

    @Sammy both ranges are 30" wide but I would likely purchase this trim kit to prevent crumbs from falling in between the range and cabinets, which drives me crazy right now. https://www.geappliances.com/appliance/Slide-in-Range-Filler-Kit-Stainless-Steel-JXFILLR1SS


    I don't want to damage the fridge cabinet, but I also just don't want to mess with the granite at all, or add any tile. We are doing some work in our kitchen but I am trying to not add much more to what we are doing, as our kitchen is already 10 years old. The slide-in range would be a great improvement over what we have now and in and of itself is already pretty costly. I looked at double oven freestanding range options but there was a clear difference in quality between the two.


    I added a photo above.

  • 4 years ago
    last modified: 4 years ago

    Thanks for posting the pic!

    Yep, it‘s exactly as I suspected. Well, what don’t you like about your current range—oven capacity? burner performance and/or layout? looks? If it’s primarily the oven capacity — or the flexibility of having a second oven — and you could make do with your current range otherwise, get a Wolf countertop convection oven. It. Is. Wonderful.

    If you simply must have this new range, though, we’ll keep trying to figure out the backsplash situation. 😑

    P.S. I assume you picked that stainless piece from HD because it’s similar in thickness to the 4” granite riser, correct?

    P.P.S. My only concern is this: Because it doesnt appear that you have a front-to-back gap to fill, I’m afraid that this will push your range out too far in front of the adjacent cabinets.

  • 4 years ago

    I went from a freestanding range to a slide-in. I just had the granite fabricator ”splice” in a piece of remnant of the same granite as the rest of the splash. It wasn’t an exact match but it was close enough that it blended well. You could also have the fabricator make a new piece from the fridge to end of the run. I did have them make the splice 5”inches instead of 4 so the range pushed up against the splash.

  • 4 years ago

    @aamassther Yes I thought about that. I am not sure exactly which granite is in our kitchen as it was this way when we bought it. I've seen similar ones at Home Depot but I can't tell exactly which one it is.

  • 4 years ago
    last modified: 4 years ago

    @Sammy I don't like a few things about the current range - all the ones you listed! We do have a Breville countertop oven which we use when we make smaller items that will fit. I bake a lot and my husband and I both enjoy cooking so I have wanted a double oven that can fit my baking sheets and pizza pans, lasagna pans, etc. in it. I prefer not to bake in the countertop oven as the results have always been better for me in the regular oven.


    We also need a space for a countertop microwave since we are removing the one above the range, and don't have space for the countertop microwave and countertop oven (or a better place to put either), so that is what made me start looking into the double oven again.


    My only hang up on the double oven is wondering if it would be too cumbersome to get heavy items in and out of that bottom oven that is so low to the floor (or any items really). These ovens get pretty good reviews so I imagine we would get used to it, but it seems awkward when first opening the bottom oven.


    Yes because of the thickness and because it looks the most unobtrusive of any option I've seen so far. Ideally I would love to not have that 4" granite riser at all and get tile backsplash, but then again I also would prefer to have quartz instead of granite and I am trying not to get too carried away in ideas or budget. Basically I have come to terms with the fact that my dream kitchen will not be in this home (based on the layout and other things) so I want to make a few changes that will improve the kitchen and functionality for the next 5-10+ years without breaking the bank.

  • 4 years ago
    last modified: 4 years ago

    ”I just had the granite fabricator ”splice” in a piece of remnant of the same granite as the rest of the splash…You could also have the fabricator make a new piece from the fridge to end of the run.”

    I thought of that too. A local granite fabricator (as opposed to the staff at HD, let’s say) who’s been in the business for more than a hot minute would be able to ID your stone easily.

    There is another option…

    The free-standing GE double-oven gas range. 🫣

  • PRO
    4 years ago

    Take a picture of your stone to a local granite fabricator. Find a remnant that matches kinda close and have him rip it and crosscut it to fit under the splash and under the lip of the slide-in. Screw a cleat to the studs in your wall, set the splash on it, and silicone it in place. Cheap, fast, and this far back the color/particulate/movement match won't matter too much on such a small piece.

  • 4 years ago

    Yes to what Joseph said and perhaps, if the match is a very, very good one, buy a piece to run the entire length of that wall. It's a very beautiful stone.

  • 4 years ago

    GE Profile PGB965YPFS Freestanding Double Oven Gas Range with Convection Oven ($1800)

  • 4 years ago

    Verbo, the very first post addresses the venting issue.


    Honestly, Joanna, I think the best plan is your first one. Just use the metal thingie!

  • 4 years ago

    @User we are taking out the microwave and cabinet above and putting in a wall mounted hood.


    @wdccruise I looked at that one yesterday in the store and honestly was not very impressed. It is just like what we have but with 2 ovens. I looked at the slide-in GE model as well, and all of the GE/GE Profile ranges were full of scratches from the grates. So now I am re-thinking all of this and we will wait to upgrade the oven until the other work is done and likely go with something else. My husband likes the Breville countertop oven we have so I will just deal both with an oven and microwave on the countertops for a while.

  • 4 years ago

    Do you know anyone that has a double oven like that? Just asking becasue they are a PITA. My tall kids had one and you about have to sit on the floor to get into the bottom oven. Are you young or shorter? The bending could be an issue.

    We have a Samsung with the tray that divides the oven and while the two smaller ovens sounds like a nice feature things just don't cook the best in the smaller spaces. YMMV

  • 4 years ago

    @RNmomof2 zone 5 I do not know anyone who has one but I did check them out in person and then decided against getting one. I am 5'3, late 30s but my husband is 6'1, early 40s and even for me it seems like it would be awkward to use that lower oven. Now I am looking at the GE Profile single oven slide-in gas range instead, and just keeping our countertop Breville oven. When that dies we can get the slightly bigger Breville Oven that can fit a bit more in it.