Software
Houzz Logo Print
john_lott

Covering vinyl brick mold

3 years ago

We just realized that our contractor installed the wrong type of window in our remodel. The understanding was that the window would match our existing windows and be trimmed in cedar. He's installed a vinyl window with some type of vinyl trim. Now he's saying that we can simply frame around it. This would extend the trim out several inches and I'm concerned it's going to look horrible. Should I push to have him replace the window or is it possible to trim over the vinyl with acceptable results?

Comments (17)

  • 3 years ago



    New installed viny window.

  • 3 years ago
    last modified: 3 years ago





    Existing windows.

  • 3 years ago

    Existing window pic is the interior of a fixed wood window, new window appears to be a casement but definitely vinyl. You cannot effectively frame over the vinyl J-channel and use cedar and have it look decent.

  • PRO
    3 years ago

    I think i would be more worried about how they installed and flashed the windows. Looks all wrong.

    John Lott thanked toddinmn
  • 3 years ago

    Todd - I am getting concerned about lots of stuff. Any specifics you see would be appreciated!

  • PRO
    3 years ago

    Is this in a covered porch? The issue is the plastic (not an approved WRB for cedar) is under the flange. Red flag in that regard, but less of an issue if this is part of a covered porch and not seeing the elements. Still not good...don't get me wrong.

    John Lott thanked Windows on Washington Ltd
  • 3 years ago

    Luckily, this is under a covered porch. Could anyone please tell me what the type of existing inset windows we have are called vs. the type of protruding vinyl window they've installed? I'm trying to educate myself for tomorrow's call with the contractor.

  • PRO
    3 years ago

    Your existing window isn’t a window per se but glass held in place with stops. To maintain an ‘all wood’ exterior you would have needed to order wood windows (which still would not have exactly matched your site built ‘window’)

  • PRO
    3 years ago

    Pictures of the inside and outside of a window you wish to match would be helpful.

  • 3 years ago
    last modified: 3 years ago

    Here an inside pic of the window we want to match. An outside pic was posted in yesterday's comments. Thank you!


  • 3 years ago

    Inside

  • PRO
    3 years ago

    Your existing window looks like it was site built -- glass was set into the opening and held in place by strips of wood.

    Will your new windows operate, and if so how -- casement, awning etc., or are they fixed?

    Is this a remodel or addition?

  • 3 years ago

    New window will be fixed. It's being added to an existing wall as part of a remodel.

  • 3 years ago

    I most definitely would not accept a white vinyl window. It needs to match your other windows, or it will stick out like a sore thumb. I would make him remove it, and put in a matching one. I hope you havent paid him for it yet. There is no way possible to get that window to match in.

  • 3 years ago

    Thanks to everyone for the information! It's been very helpful. The vinyl window is coming out and I have arranged to have an insulated glass unit (IGU) window installed. Thankfully, the contractor will not be handling the install.

  • PRO
    3 years ago

    Sounds like a good solution.