Software
Houzz Logo Print
ryan_luckie

Stair Tread and Riser Movement

3 years ago

We've got a gap between our riser and our tread on the first step after our landing.


On the left side of the stair the riser is flush with the tread at the top and floating just off of the hardwood. On the right side, the riser has sunk into the gap with the hardwood and is detached from the tread.


detached sealant is visible.



video of deflection showing movement in the stair tread, and it being applied to the riser.



I started out the day intent on taking off the stair tread... trying to see if there is something I can do to firm it up, get less deflection in the tread, and re-attach the riser so it is flush with the tread... I've ripped off some molding (that needed some revitalization and new caulk anyway), but I'm now questioning if I should take this much further... the stair treads run underneath this heavy molding piece on the side, which is continuous to the top of the stairs... Thoughts on how to proceed?







Comments (2)