Software
Houzz Logo Print
kim_caracciola

glass tile install gone bad!!! HELP!

3 years ago

More photos in conments HELP!!!

Comments (10)

  • 3 years ago

    Help

  • 3 years ago

    Help

  • 3 years ago

    Help

  • 3 years ago
    last modified: 3 years ago

    A tile installer recently told me that whenever there is a change in plane - such as a corner - that caulking should be used because grout will always crack. Your photo seems to prove his point. Hopefully, someone with more experience than me will chime in here.

  • 3 years ago

    If you cannot be bothered to write a clear sentence as a post, instead of a series of posted copies of posts elsewhere, you will get little to no response.

  • 3 years ago

    I actually reposted it because clearly I was having a challenging time with this one. But thank you for your great advice, I will certainly keep it in mind.

  • 3 years ago

    I'm not sure but...


    If it's a new install, the mortar might not be totally dry yet. I would let it dry longer. See if the discoloration disappears, and give it longer to set before further use. Do you know what mortar was used? I'd wait as long as the manufacturer suggests.


    The cracks in the corners, as noted above, aren't a big deal. Someone should remove the grout and replace with caulk in the same color. (Most grout companies sell caulk to match their grout to make it easy.)

  • PRO
    3 years ago

    The majority of installers are not qualified to work with glass. Basic Tile 101. Changes in plane require 100% silicone sealant. Glass expands and contract more than tile. Without a flexible movement joint the glass tiles will crack. The chipped areas showing through the glass are from the lack of knowledge when cutting, Proper glass blade, correct RPM's of wet saw etc. The small dark squares within each tile may be a reflection or adhesive residue from individual SKU stickers when buying from a box store. Another reason why many of us will not use box store material.

    Fun Facts - Designers specifying glass tiles please take note.

    Large format for glass tile is 9 square inches. Yes, a 3"x3".

    Glass tiles can't be installed near a direct heat source. Example. Gas cooktop, back burner, glass backsplash, good chance of cracking. Witnessed this several times.

    Check thermal shock ratings before using in a shower. Cool glass due to AC hit with hot water. You can guess what happens.

    Use of epoxy grout is most often specifically ruled out by manufacturers.

    Always research the specific product. Hire a Tile Setter that has experience and knowledge of the different methods needed for a successful installation.

  • PRO
    3 years ago

    You asked for help CTEC and myself are here to help you find a qualified installer this second way more expensive time around. there's no help for the install or salvaging anything.Did you want help in the hiring and vetting.process?

    Ll


  • PRO
    3 years ago

    Full redo.