If, the stain is applied fairly moderately. You won't get any tannin bleeding through.

Another good preventive step is to apply Nordicseal over the white stain. It will give it another layer to prevent the tannins from bleeding through.

Thank you!
How many coats of each would you recommend? White stain, nordicseal and hd traffic raw?
Does the Bona traffic need to be used if other products are Bona or could the Loba invisible be used as a top coat?

1 stain, 1 or more Nordicseal depending on the look or intensity you want and two coats of Raw.

You can use Invisble, if, that's the look you want.

Thanks so much :)

One more question and then I’ll leave you alone 😄…. So through my research… I see everyone recommending water based for the non yellowing…. But I also see many suggestions for the oil stain, using water based finish ….. so is the water based recommendation mostly for the poly, not as much the stain itself? Im sorry- just trying to understand it all :)

Also- do you think invisible and raw are fairly comparable as far as durability?

Yes, the water base recommendation is for the poly only.

Invisible has whitener in it. Raw does not. Both are ultra matte finishes.