Use a velcro cord container....it's a thin strip of velcro that you wrap around the cords to neaten them up. Use one for each monitor to hold them all together close to each monitor. Then perhaps use small decorative boxes with holes cut in the sides so that the cords can fit in them, on the desk. Or use surge protectors attached to the underside of the desk to plug in, and hide their cords on the inside of the desk legs (attach with command strips or the like).

I was just looking at that!

https://www.amazon.com/dp/B0C1W7FF2R?th=1&linkCode=sl1&tag=smartstuff00-20&linkId=7054032f18ac90c511e02d03e0e4d28c&language=en_US&ref_=as_li_ss_tl

Thanks I already have this but it doesn’t hide the cords for all three monitors

Agree that the cable management box is likely the best approach - the only other way would be put something on the back of your desk that covers the whole area -something like a desk mounted privacy panel

How "precious" is the desk? Mine have always had the holes for cords. Maybe you could drill a couple?

Yes I am thinking of changing the desk

I went the same route as chispa suggests. I drilled a hole in the desktop and covered it with a grommet. They are available in several sizes and colours to match your desk.

A sample desk grommet. They are available in dark tones as well as a brass-like finish.

I have a cable management box but with so many wires coming out of the middle monitor and the hdmi and power cords coming out of the other two even adding the box doesn’t improve things. I like the idea of the privacy panel. I wish there were some fun ones for home office s

you could get a basic panel and then cover it in a fun peel and stick wallpaper

Great idea!