Utter crapola. Find an actual cabinet finisher. One who uses Renner, Centurion, Milesi, ICA, etc.

Hmm…I hadn’t heard of those brands! Unfortunately, I need something soon and don’t have time to order. I did some research and will definitely look into those brands for our next project. Thank you!

Our painter used SW Emerald Urethane Trim Enamel in a Satin finish on my new custom cabinets. It has been one year already since we remodeled the kitchen. The paint is fantastic! It washes up so well and it doesn't chip. I'm very happy with it. All my trim and doors are painted with it also. It is a water based urethane not oil like the Valspar. SW Proclassic Alkyd paint is a little cheaper than the Emerald and it is a very good paint also. Good Luck!

I have used the Valspar, and its about 7 yrs later, and it still perfect. However, your finished job, is only going to be as good, as the prep you do before you use the paint. It takes a lot of prep, and it can take quite a while to do all that prep. No short cuts, when you paint cabinets.

Its all about the prep as mentioned above. If the prep doesn't take 4-5 times the length of time to pain you have done not prepped properly. The best paint in the world will fall off in short order without the proper prep.

Follow the directions in the Guides in the Kitchen Cabinet Painting Experts on FB.