Software
Houzz Logo Print
dave4242

Reprime siding before installing?

We are installing a large window in the gable end of our house. The siding we will be using is oil primed clear cedar, which is primed on both sides with an oil primer. I want to make sure that we have the best adhesion possible for the exterior latex paint as well as avoid tannin bleed.
my thought was to reprime the exposed surface with latex primer and then two coats of latex paint.
Would this be the best approach, or should we prime again with oil stain blocking primer and then two coats of latex topcoat? Thank you.

Comments (2)