The pictures are terrible. They are too close up to show anything.

Sorry HU, this one is a little more zoomed out. I can go back and take more from afar later. Is this any better?

The head flashing was more concerning than the sill pan flashing. But it isn’t good either. You probably want the whole thing pulled and reinstalled by a better carpenter.

Hard to tell but is jamb depth same thickness as wall?

What is wall thickness?

What is door jamb depth?

Thanks Jeffrey. Both wall and jamb are 6”.

I’m not clear on what exactly I should be asking for, particularly given that the GC is pushing to paint which doesn’t feel right.

What type of door is it exactly?

We have two: https://pinkysirondoors.com/products/air-5-dutch-single-full-arch-customize

https://pinkysirondoors.com/products/air-5-dutch-single-full-arch-customize

The flashing looks messy, and not applied well. But there is no pulled back shot showing the whole door from head to sill. No perspective. Why people want to focus on Marco Rubio’s single outlying hair on his forehead rather than the whole failed hair transplant is beyond me.

So the framing system for this is a Terrace Type door. I would like to see the sill/threshold setup and the opening before the door was installed. The sill looks odd to me and looks more like a window than a door.

"Not craftsman like" is the only thing that can be said from those too extreme closeups. The Before framing needs to be shown, as well as any "during", and the big picture After. Not the micro cellular level.

Blast a hose against it and see if it leaks. 10 minutes minimum.