I custom designed this med cab. Basically my manufacturer, Bellmont Cabinet Company, allows customization just about everything I dream up. I started with a standard wall cabinet and requested it be reduced in depth to 4 1/2" and finished on all sides. I then asked for the door to be prepped for glass and I installed mirror in the void. The electrical box was wired before the cabinets were installed and the back of the cabinet was cut to allow the receptacle to come through and the face plate screws are extra long to accommodate the thickness of the back of the cabinet. Lastly, I applied a decorative trim on the top to act as crown molding. The mirrors to either side are flat against the wall and are trimmed in material that matches the cabinet door profile and this trim dies into the side of the med cab. Hope this helps.