Software
Houzz Logo Print
cepowers77

Glass tile installation poorly done

12 years ago
We had two bands of Emser Lucente Pellestrina glass tile installed in our shower (remodel) and the contractor installed an number of the tiles poorly - they're chipped and crooked. Can these be easily replaced? (we have not paid him in full and are considering hiring someone else to re-do them) The photos are just two examples..

Comments (16)

  • 12 years ago
    So unfortunate when you hire someone to do a job for you and they do such a poor install. That is not acceptable work at all. I would see if it can be reinstalled by the original person, at their expense, before you hire someone else. And, of course, do not pay them for a completed job unless it is finished to your satisfaction.

    I do not know how hard or easy a fix that would be but perhaps a pro will comment. Good luck.
    Clair thanked unwantedadvice
  • 12 years ago
    Looks like the guy didn't have a tile saw and just cut them by hand some how. Looks terrible. I'd be having a fit!!
    Clair thanked nati_suzanne
  • 12 years ago
    I don't have a dog in the race here so I'm not on anyone's side. I'm interested in this as we tiled our floor last month, and will be doing a backsplash after our new countertop is installed tomorrow.

    That being said, it strikes me that one of the problems is that the tile is so narrow, that if it's off by even 1/64th of an inch, it's going to show. And cutting a piece of tile as small as some of the pieces is very tough, and IMHO, dangerous.

    If you can't live with it, now's the time to have to removed, and go with a larger tile so the imperfections aren't so noticeable.
    Clair thanked hayleydaniels
  • 12 years ago
    HI -- This is a very sloppy job . This is a sign of a contractor that doesn't have any pride in their work . Don't pay him for this and find someone else to fix it . Well , tell him your not happy with that and see if he will fix it and he will have to pay for the replacement tiles . Then if he won't agree then go to plan B .
  • 12 years ago
    I installed glass mosaic tiles in two bathrooms, and while the job may not be perfect it's way better than this. No way would I pay a professional for this install.
    Clair thanked charleee
  • 12 years ago
    Well, I've looked at a lot of glass tile installations since this (photos and actual installations) and haven't seen any done this poorly. Even the local tile store thought it should be redone. I think the problem is that he tried to "piece" in too many small tiles, rather than having measured accurately, so that this didn't have to be done.
  • PRO
    12 years ago
    Wow - brutal. Did he cut them with a wood saw?

    What type of shower wall preparation is it? You need to be careful not to damage a topical installation if you in fact choose this...
    Clair thanked By Any Design Ltd.
  • 12 years ago
    Thank you both so much! I agree completely, as do two local tiles stores whom I've consulted. I don't know why he had to "piece in" tiles. We've contacted our contractor who hasn't gotten back with us, so we are hiring someone else to finsh the job. It will most likely involve tearing out the band and replacing it but it should look better.
  • 12 years ago
    The tiles are installed on cement board.
  • 12 years ago
    Now I understand part of what went wrong. He should have used 6 rows of tile per "band", so that the tiles fit together properly. Instead (against our request), he did one band of of 7 tiles and one of 6, causing the tiles to not fit together, so he ended up piecing in a lot of tiles. We are now having someone come out and replace them. It may be a bit tricky but should look much better!
  • PRO
    12 years ago
    I realize now that when you split the sheets the tile spacing doesn't always match up, but he should have laid them out on the floor and swapped out individual tiles to complete the rows before installing. I just installed the same thing today for a customer and had to do just that.
    BTW, cement board is okay for a substrate and shouldn't be too difficult to remove, but I hope he sealed the seams and corners of the cement board before tiling. I myself use Schluter brand membrane on all shower and tub surround walls before tiling.
    Clair thanked David Smallwood Renovations
  • 12 years ago
    Thank you! That's what I thought, too... That's good to know about the membrane - I don't think he did that but I'm not sure. We're going to have the bands redone but leave the tile intact. (with any luck) Thank goodness we have lots of extra tile!
  • 10 years ago

    IR CAN YOU POST THE FINISHED FIX? WE ARE HAVING ISSUES WITH OURS AND WANT TO SEE HOW YOURS TURNED OUT IN THE END

  • 10 years ago

    the problem I've noticed with some trades men is they think because they've done similar work a hundred times all jobs are the same. as a result they by-pass a manufactures instructions on how to accomplish the task at hand. then they try and sell the customer a thousand excuses for the sloppy work.

  • 10 years ago
    Yes, glass tile is tricky. In our case, when the tileman pulled off the front contact paper, the glass tile came off the wall, fell and broke or chipped. And we did not have a whole lot of extra tiles. So a few of the flawed tile had to be used. Of course those are the ones I see all the time. Rrrr.