Software
Houzz Logo Print
keysfins

How to measure for drapes?

12 years ago
last modified: 12 years ago
How does one measure for drapes? I have a functional transverse rod that operates from both the left and the right, but asymmetrically. It spans a 72" opening, then a 19" pillar, and then a 95" opening (patio sliders with pillar between two spans). The height of each opening is 94".

The rod is 105" from the floor, the current drapes measure 102", and they are about 1.5" off the floor (which is fine). The current drapes on the 72" span stack left, and are held clear of the opening, as that is a working slider we use for the patio. The larger span we CAN use, but we generally don't. The larger span has a 30" wall space to the right, and the drape stacks right.

The fabric I will be supplying is 54" wide, with a vertical repeat of 7.25", and the same for the horizontal repeat. We do not require a great deal of fullness for the drapes. In fact, they are mostly decorative, and will have a blackout liner.

I am perplexed as to how much fabric I should order, and what, exactly, 1 ½ times and 2 times fullness would look like.

Any assistance is appreciated. The fabric is hugely expensive, so the last thing I want to do is order too much! This is for a Florida home, casual style. The fabric sample is below.

Comments (10)

  • 12 years ago
    Thanks, those articles take some of the mystery out of the calculations.

    Have to give a shout out to Jill Geisdorf from Chic on the Cheap for her excellent eye for color and style. There were WAAAY too many choices and the prospect of choosing colors and patterns that would work for us and our lifestyle was truly overwhelming. :-)
  • 12 years ago
    You take a photo of your space & then explain your measurement . Mention the style also.
    I am positive the suplier can help you with the amount you need.
    I usually take 1 meter for 1 ft rod. This is sufficient for any style. Good luck.
    keysfins thanked Shahina
  • 12 years ago
    Thank you, Shahina. That seems to be a much easier method.
  • 12 years ago
    Rod is 216" overall. Left side is 96" (8 feet); right side is 120" (10 feet). So a rough estimate is 8 yards for the left, and 10 yards for the right, just as a starting point?
  • PRO
    12 years ago
    Industry standard for fullness for pleated drapery panels is 2.5. I came up with 4.5 widths of material for the left opening and 5.5 widths for the right opening. Allowing for matching the pattern repeat (but not to pleat to design), each cut would be 123.25 (allowing for double 4" hems and double 4" headers) x 10 widths = 36.25 yards. I also allowed for the panels to finish at "just" off of the floor (different than your current 1.5" off of the floor).

    The fabric is really pretty!
    keysfins thanked SK Designs
  • 12 years ago
    last modified: 12 years ago
    SK Designs, thank you so very much. I appreciate your calculations. My "rough estimates" were off terribly! Do I understand that the 2.5 for fullness relates to pleating, as well as overall look of the drapery?

    We LOVE the fabric, and although it is (very) expensive, we are willing to invest in this case. The draperies will really "make" this room. (We have another area where we will use a less expensive fabric that will still be suitable for the project.)

    This will be in a room with a leather sectional similar in color to the colors in the fabric, with a neutral sisal-type area rug. The sectional and the draperies give the pop of color that we want in the space. I would say that we have a "coastal casual" style in our furnishings, although this fabric will add a bit of sophistication, I think.

    Given those two factors, what type of pleat would you select?
  • PRO
    12 years ago
    So that your "stackback" is not too large, I would recommend either a 2-finger pinch pleat (also known as a butterfly pleat) (it is less traditional, more casual, and less what-some-people-think-of-as-old-fashioned than a three finger pinch pleat, or a Euro pleat. They are both made the same way and use the same fullness, but the Europleat is "pinched" at the top of the pleat instead of at the bottom. I have attached a photo of the pleat heading sampler that I show to my clients...the fourth pleat from the left is a 2-finger pinch pleat (butterfly pleat). The fifth from the left is the Europleat, which can also have either two or three fingers. I am sure you can find some photos online of a full drapery panel that shows what a panel looks like when pleated in either of those methods, so that you can compare to see what you like better.
    keysfins thanked SK Designs
  • 12 years ago
    Thank you again, SK designs!