Software
Houzz Logo Print
lbcross

Vanity cabinet too large for top!

12 years ago
We bought this 48" in vanity cabinet and a 49" granite vanity top. It appears the cabinet is actually 49 1/2 in withe the side panels. What are my options? Both were purchased separately from different stores.

Comments (17)

  • 12 years ago
    Return one or the other.
  • 12 years ago
    Can't take the cabinet back it was a clearance floor model and, we already installed the knobs. Now I'm left with having the top custom made or figure out how to make this work. I'm already over budget for this remodel!
  • 12 years ago
    Is the vanity freestanding?
  • 12 years ago
    Yes, it like a piece of furniture. We planned on surrounding it with subway tile wainscoting.
  • 12 years ago
    Remove the side panels and replace with 1/8 inch thick veneered board, stained to match. It may look rinky dink, though, so be prepared to return the top and get one custom cut.
  • 12 years ago
    last modified: 12 years ago
    Mistakes happen. When they do it is best to correct immediately. Return the top. Get one custom if that is your only alternative. Don't make a double mistake by fiddling with the cabinet. I assume the person that mis-measured is a family member. Have them sell some of their personal items to make up the difference in budget. :)
    This will insure proper measurements in the future (measure twice, order once).
  • 12 years ago
    Denita, :D! That's great!
  • 12 years ago
    The vanity was advertised as a 48" vanity. Never ASSUME!
  • 12 years ago
    last modified: 12 years ago
    I believe it lbcross. I walk around with a 25 ft measuring tape in my purse 24/7 because I never believe what is advertised :) lol...
  • 12 years ago
    You should be able to return the vanity ( unless you love it). They advertised it as 48", explain what happened. Otherwise you may be able to get a remnant stone for the top that would fit. I agree with the others don't try to mess around with the sides
  • 12 years ago
    What if we customize the top to fit the inside vanity. Pic enclosed
  • PRO
    12 years ago
    Me too Denita; I'm never without the small luxury of my silver monogrammed tape measure and snazzy little notebook. lbcross, I'd be cross as well. But the solution you just posted looks good if you can pull it off as an inset top -- just might be a little tougher to keep that front edge clean.
  • 12 years ago
    I keep a white sewing tape measure in my purse. I'll use it, then absentmindedly hang it around my neck. Even the funny looks I get don't clue me in to the fact that I'm wearing a tape measure. I usually find it at the end of the day when I'm getting ready to take a shower........
  • 12 years ago
    lol...I thought I was the only one that walked around with a tape measure! I feel right at home now :)
  • PRO
    12 years ago
    Agree with the above comment. Remove the two 3/4" side panels and replace with 1/8" veneer panels. The overall width of the cabinet will then be 48 1/4" The stone top will overhang the ends 3/8" on both sides

    You can use 1/2" veneer plywood panels to replace the 3/4" panels and the stone top will sit flush with the two ends

    1/2" plywood veneer is probably a better choice because you can apply a wood veneer to the raw plywood edges

    Stain or paint to match
  • 12 years ago
    Thank you all for your suggestions. Especially about keeping a tape measure in my bag! I am returning the granite top and will custom order a new one.