A computer desk for Explorers at Heart. Perfect for your home office or on your next expedition to the Gobi Desert. Mahogany legs fold and it looks great standing to the side ready for action. Hidden compartments store all your computer gear. see more images on this site.

Kitchen - modern kitchen idea

D-Trac Construction was contracted to address install issues from a previous contractor related to the workmanship and install of the exterior hardie board package. Because of the issues, the local county would not pass building permit inspection due to non-compliance with the Alberta Building Code and the Safety Codes Act. Issues and corrective actions included: 1. Aluminum J and corner trim does not allow for the plank to be sealed (caulked at termination). Corrective Action: Install 5/4" Smart Trim and color match caulk at all terminations. 2. Flashing detail on primary head flashings are cut and bent, creating point of entry on each end dam at the back side of drip. Corrective Action: Install new primary head flashings using the fold method to create end dam. 3: Incorrect stagger on plank install, Not enough distance between butt joints on stagger, no slip plates at butt joints. Corrective Action: Install new plank using a either a 24" or 32" stagger pattern, with aluminum slip plates behind all butt joints. 4: Many terminations through plank siding have no trim block, not sealed correctly. Corrective Action: Install 5/4" trim blocks to allow plank to be sealed(caulked to termination. At the end of the project, a final inspection was completed and the local county passed the building permit inspection.

D-Trac Construction was contracted to address install issues from a previous contractor related to the workmanship and install of the exterior hardie board package. Because of the issues, the local county would not pass building permit inspection due to non-compliance with the Alberta Building Code and the Safety Codes Act. Issues and corrective actions included: 1. Aluminum J and corner trim does not allow for the plank to be sealed (caulked at termination). Corrective Action: Install 5/4" Smart Trim and color match caulk at all terminations. 2. Flashing detail on primary head flashings are cut and bent, creating point of entry on each end dam at the back side of drip. Corrective Action: Install new primary head flashings using the fold method to create end dam. 3: Incorrect stagger on plank install, Not enough distance between butt joints on stagger, no slip plates at butt joints. Corrective Action: Install new plank using a either a 24" or 32" stagger pattern, with aluminum slip plates behind all butt joints. 4: Many terminations through plank siding have no trim block, not sealed correctly. Corrective Action: Install 5/4" trim blocks to allow plank to be sealed(caulked to termination. At the end of the project, a final inspection was completed and the local county passed the building permit inspection.

D-Trac Construction was contracted to address install issues from a previous contractor related to the workmanship and install of the exterior hardie board package. Because of the issues, the local county would not pass building permit inspection due to non-compliance with the Alberta Building Code and the Safety Codes Act. Issues and corrective actions included: 1. Aluminum J and corner trim does not allow for the plank to be sealed (caulked at termination). Corrective Action: Install 5/4" Smart Trim and color match caulk at all terminations. 2. Flashing detail on primary head flashings are cut and bent, creating point of entry on each end dam at the back side of drip. Corrective Action: Install new primary head flashings using the fold method to create end dam. 3: Incorrect stagger on plank install, Not enough distance between butt joints on stagger, no slip plates at butt joints. Corrective Action: Install new plank using a either a 24" or 32" stagger pattern, with aluminum slip plates behind all butt joints. 4: Many terminations through plank siding have no trim block, not sealed correctly. Corrective Action: Install 5/4" trim blocks to allow plank to be sealed(caulked to termination. At the end of the project, a final inspection was completed and the local county passed the building permit inspection.

D-Trac Construction was contracted to address install issues from a previous contractor related to the workmanship and install of the exterior hardie board package. Because of the issues, the local county would not pass building permit inspection due to non-compliance with the Alberta Building Code and the Safety Codes Act. Issues and corrective actions included: 1. Aluminum J and corner trim does not allow for the plank to be sealed (caulked at termination). Corrective Action: Install 5/4" Smart Trim and color match caulk at all terminations. 2. Flashing detail on primary head flashings are cut and bent, creating point of entry on each end dam at the back side of drip. Corrective Action: Install new primary head flashings using the fold method to create end dam. 3: Incorrect stagger on plank install, Not enough distance between butt joints on stagger, no slip plates at butt joints. Corrective Action: Install new plank using a either a 24" or 32" stagger pattern, with aluminum slip plates behind all butt joints. 4: Many terminations through plank siding have no trim block, not sealed correctly. Corrective Action: Install 5/4" trim blocks to allow plank to be sealed(caulked to termination. At the end of the project, a final inspection was completed and the local county passed the building permit inspection.

D-Trac Construction was contracted to address install issues from a previous contractor related to the workmanship and install of the exterior hardie board package. Because of the issues, the local county would not pass building permit inspection due to non-compliance with the Alberta Building Code and the Safety Codes Act. Issues and corrective actions included: 1. Aluminum J and corner trim does not allow for the plank to be sealed (caulked at termination). Corrective Action: Install 5/4" Smart Trim and color match caulk at all terminations. 2. Flashing detail on primary head flashings are cut and bent, creating point of entry on each end dam at the back side of drip. Corrective Action: Install new primary head flashings using the fold method to create end dam. 3: Incorrect stagger on plank install, Not enough distance between butt joints on stagger, no slip plates at butt joints. Corrective Action: Install new plank using a either a 24" or 32" stagger pattern, with aluminum slip plates behind all butt joints. 4: Many terminations through plank siding have no trim block, not sealed correctly. Corrective Action: Install 5/4" trim blocks to allow plank to be sealed(caulked to termination. At the end of the project, a final inspection was completed and the local county passed the building permit inspection.

Balanced on the East River between the Brooklyn and Manhattan Bridges, this cardboard box factory was the tallest reinforced concrete structure in the world when it opened in 1914 and now houses 124 loft apartments. The primary components for this renovation were manufactured in Brooklyn. One end of the living space is adorned by cabinetry produced by Dado Woodworking in Red Hook (south) and hand painted on site. At the opposite end, the space is modified by double action folding steel doors fabricated by Argosy Designs in Greenpoint (north).

The pool cabana is the perfect compliment to the owner's new in ground pool & exterior landscaping. An outdoor bar allows guests to not miss any of the action and a custom copper roof provides a shaded area or shelter if needed. Photography: Dan Callahan

Balanced on the East River between the Brooklyn and Manhattan Bridges, this cardboard box factory was the tallest reinforced concrete structure in the world when it opened in 1914 and now houses 124 loft apartments. The primary components for this renovation were manufactured in Brooklyn. One end of the living space is adorned by cabinetry produced by Dado Woodworking in Red Hook (south) and hand painted on site. At the opposite end, the space is modified by double action folding steel doors fabricated by Argosy Designs in Greenpoint (north).

Balanced on the East River between the Brooklyn and Manhattan Bridges, this cardboard box factory was the tallest reinforced concrete structure in the world when it opened in 1914 and now houses 124 loft apartments. The primary components for this renovation were manufactured in Brooklyn. One end of the living space is adorned by cabinetry produced by Dado Woodworking in Red Hook (south) and hand painted on site. At the opposite end, the space is modified by double action folding steel doors fabricated by Argosy Designs in Greenpoint (north).

Balanced on the East River between the Brooklyn and Manhattan Bridges, this cardboard box factory was the tallest reinforced concrete structure in the world when it opened in 1914 and now houses 124 loft apartments. The primary components for this renovation were manufactured in Brooklyn. One end of the living space is adorned by cabinetry produced by Dado Woodworking in Red Hook (south) and hand painted on site. At the opposite end, the space is modified by double action folding steel doors fabricated by Argosy Designs in Greenpoint (north).

In addition to the cabana’s large interior stand-up bar complete with hi-boy stools, guests can also gather al fresco at the outdoor bar station. The convenient folding glass window panels help to ensure everyone can join in the action regardless of whether they prefer to be inside or out.

Balanced on the East River between the Brooklyn and Manhattan Bridges, this cardboard box factory was the tallest reinforced concrete structure in the world when it opened in 1914 and now houses 124 loft apartments. The primary components for this renovation were manufactured in Brooklyn. One end of the living space is adorned by cabinetry produced by Dado Woodworking in Red Hook (south) and hand painted on site. At the opposite end, the space is modified by double action folding steel doors fabricated by Argosy Designs in Greenpoint (north).

Audrey Hall
Mid-sized trendy open concept light wood floor living room photo

Balanced on the East River between the Brooklyn and Manhattan Bridges, this cardboard box factory was the tallest reinforced concrete structure in the world when it opened in 1914 and now houses 124 loft apartments. The primary components for this renovation were manufactured in Brooklyn. One end of the living space is adorned by cabinetry produced by Dado Woodworking in Red Hook (south) and hand painted on site. At the opposite end, the space is modified by double action folding steel doors fabricated by Argosy Designs in Greenpoint (north).

Our client contacted us regarding their outdated bathroom. They could not handle taking a shower in their “TOMB” shower anymore. They wanted to update their bathroom giving it a streamlined look with a traditional touch. Our client’s desires were: • Wanted a large open shower • Wanted a larger master closet • Wanted a better way of excising the wall cabinet by the vanity • They wanted to remove their Jacuzzi tub After coming up with a design that satisfied the customer’s needs, we started the demo process and ran into the first obstacle. Because of the construction of the original closed shower, there was no moisture barrier used which caused the existing framing and exterior sheathing to decay. We were also startled by what look like an expanding black cloud of carpenter ants, when we opened up the wall. After making the necessary repairs, we continued with the remodel which consisted of a dramatic large shower, the large subway design, granite shelving along with the bronze accent tile that enhances the over all look of the show er. It also gave it a larger appearance with the custom glass enclose. Another concern we had after relocating the shower to its new location, was that it was under an existing skylight. We felt that there maybe a moisture concern especially during the winter months. To over come this obstacle we installed an exhaust fan near the ceiling in the w all above the shower. We painted the exhaust fan grill the same color of the walls, so the fan would not stand out. To make sure that there would not be any problem with condensation around the skylight , we trimmed the skylight with azek material. We installed custom cabinets that reflected the look the client was trying to achieve. During this process we over came our last obstacle by installing bi-fold style doors on the wall cabinet next to the vanity, which would swing completely out of the way so the customer could have full access to the slide drawers. The handles were placed on the doors to make it look like a regular two door wall cabinet. The bi-fold action also allowanced it to clear a wall sconce.

Photo: Nasozi Kakembo © 2015 Houzz
Living room - eclectic open concept concrete floor living room idea in New York with white walls

Example of a mid-sized minimalist guest carpeted and beige floor bedroom design in New York with beige walls and no fireplace