Energy Efficiency: Every effort has been utilized to reduce and minimize energy use through an effective strategy of both passive heating and cooling, as well as state-of-the-art active solar thermal and photovoltaic on site off-grid energy production. Optimal solar orientation with an attached thermal mass food production greenhouse on the Lower Floor enables hot air to be introduced into the house during the winter, and rise via. a thermal chimney “stack effect” and distributed throughout the house. In the summer the same thermal chimney is used to channel hot air to rise up to the Upper Loft vegetated Roof Terrace, where it is exhausted. This condition provides a positive air pressure in the Winter, and a negative pressure in the summer, drawing in cooler outside air from every open window. In addition carefully proportioned roof eave overhangs provide deep passive solar gain and additional day lighting in the winter, and cooling shade in the summer. Active mechanical systems include solar thermal which produces domestic hot water and is integrated into hydronic radiant heated floors. This is supplemented with a multi-split heatpump, on demand backup hot water, and an ERV, which collectively provide active heating, cooling, dehumidification, and healthful indoor air quality. The entire house and detached Barn are off-grid with a 14.4 kW solar array, whole-house batteries, and backup generator. Further, the home is super insulated and extremely tight with high energy performing windows and doors and LED lighting throughout, and even a high efficiency woodstove. Integrated Design: From the beginning and throughout construction, this home demonstrates a close collaboration between the Architect, Contractor, and Owners. Healthful materials and finishes standards, autonomy and energy efficiency, and environmental impact and sustainability were primary goals and stressed throughout. Careful attention was paid to finishes which will require minimal long term maintenance such as the galvalume metal roof (which also provides for rainwater harvesting) and fiber cement siding for longevity. Resource Efficiency / Conservation: Resource conservation began with Schematic Design which utilizes a 2 ft. grid of modular components, thereby optimizing construction efficiency and minimizing on site waste. The site was cleared with the trees stockpiled for future lumber harvesting and firewood. The foundation walls are “Ideal Walls” which use less than half the concrete of a conventional poured wall or block, and do not require extensive concrete footings, exterior insulation, or waterproofing. These panels are prefabricated off site and set in only a few days, which further reduces on site impact and construction lead time. Resiliency: Respect for climate change and mitigating its impact were primary considerations in the design and selection of materials and systems. The home is sited high on a south facing slope as protection from high water or flood and to optimize both passive and active solar opportunity. With remarkably tight construction and super insulation the interior is buffered from both outdoor heat and cold extremes. The metal roof and fiber cement siding are fireproof and resistant to the impact of high winds. And these materials are specified for minimal maintenance and longevity. Further, the attached Greenhouse and Upper Roof Terrace is landscaped and suitable for a vegetable garden with abundant sunshine, easy to water, and with no need for fencing to keep deer at bay. All this being a notable case study for Regenerative Design. Innovation: This home exemplifies Biophilic Design principles to facilitate symbiotic living in harmony with Nature. This incorporates careful attention to natural day lighting, indoor air quality, rainwater catchment and wastewater reclamation, garden food production with vegetated roofs, the home hearth and fire, and connected interaction with the weather and the surrounding natural ecosystems. Community Impact: This EcoHome project has already been presented at several Sustainable Building lectures as a model case study for “Green Building”, including USGBC at Brock Environmental Center in Virginia Beach, VA. Plans are underway for an Open House tour for area Architects and students.

Energy Efficiency: Every effort has been utilized to reduce and minimize energy use through an effective strategy of both passive heating and cooling, as well as state-of-the-art active solar thermal and photovoltaic on site off-grid energy production. Optimal solar orientation with an attached thermal mass food production greenhouse on the Lower Floor enables hot air to be introduced into the house during the winter, and rise via. a thermal chimney “stack effect” and distributed throughout the house. In the summer the same thermal chimney is used to channel hot air to rise up to the Upper Loft vegetated Roof Terrace, where it is exhausted. This condition provides a positive air pressure in the Winter, and a negative pressure in the summer, drawing in cooler outside air from every open window. In addition carefully proportioned roof eave overhangs provide deep passive solar gain and additional day lighting in the winter, and cooling shade in the summer. Active mechanical systems include solar thermal which produces domestic hot water and is integrated into hydronic radiant heated floors. This is supplemented with a multi-split heatpump, on demand backup hot water, and an ERV, which collectively provide active heating, cooling, dehumidification, and healthful indoor air quality. The entire house and detached Barn are off-grid with a 14.4 kW solar array, whole-house batteries, and backup generator. Further, the home is super insulated and extremely tight with high energy performing windows and doors and LED lighting throughout, and even a high efficiency woodstove. Integrated Design: From the beginning and throughout construction, this home demonstrates a close collaboration between the Architect, Contractor, and Owners. Healthful materials and finishes standards, autonomy and energy efficiency, and environmental impact and sustainability were primary goals and stressed throughout. Careful attention was paid to finishes which will require minimal long term maintenance such as the galvalume metal roof (which also provides for rainwater harvesting) and fiber cement siding for longevity. Resource Efficiency / Conservation: Resource conservation began with Schematic Design which utilizes a 2 ft. grid of modular components, thereby optimizing construction efficiency and minimizing on site waste. The site was cleared with the trees stockpiled for future lumber harvesting and firewood. The foundation walls are “Ideal Walls” which use less than half the concrete of a conventional poured wall or block, and do not require extensive concrete footings, exterior insulation, or waterproofing. These panels are prefabricated off site and set in only a few days, which further reduces on site impact and construction lead time. Resiliency: Respect for climate change and mitigating its impact were primary considerations in the design and selection of materials and systems. The home is sited high on a south facing slope as protection from high water or flood and to optimize both passive and active solar opportunity. With remarkably tight construction and super insulation the interior is buffered from both outdoor heat and cold extremes. The metal roof and fiber cement siding are fireproof and resistant to the impact of high winds. And these materials are specified for minimal maintenance and longevity. Further, the attached Greenhouse and Upper Roof Terrace is landscaped and suitable for a vegetable garden with abundant sunshine, easy to water, and with no need for fencing to keep deer at bay. All this being a notable case study for Regenerative Design. Innovation: This home exemplifies Biophilic Design principles to facilitate symbiotic living in harmony with Nature. This incorporates careful attention to natural day lighting, indoor air quality, rainwater catchment and wastewater reclamation, garden food production with vegetated roofs, the home hearth and fire, and connected interaction with the weather and the surrounding natural ecosystems. Community Impact: This EcoHome project has already been presented at several Sustainable Building lectures as a model case study for “Green Building”, including USGBC at Brock Environmental Center in Virginia Beach, VA. Plans are underway for an Open House tour for area Architects and students.

Tuscan patio photo in San Francisco

Patio - mediterranean patio idea in San Francisco

Inspiration for a mediterranean patio remodel in San Francisco

Example of a tuscan home design design in San Francisco

Inspiration for a mediterranean home design remodel in San Francisco

Photo of an asian landscaping in San Francisco.

Tuscan patio photo in San Francisco

This is an example of a mediterranean landscaping in San Francisco.

Zen deck photo in San Francisco

Photo of a mediterranean landscaping in San Francisco.

Example of a deck design in San Francisco

Deck - asian deck idea in San Francisco

Patio - mediterranean patio idea in San Francisco with a pergola

Inspiration for a zen deck remodel in San Francisco

Inspiration for a deck remodel in San Francisco

MEMORIAL FOUNTAINS KANSAS CITY ~ARCHITECTURAL POOL FOUNTAINS KANSAS CITY ~SPRAY RINGS KANSAS CITY ~FLOATING FOUNTAINS KANSAS CITY ~ARCHITECTURAL FOUNTAINS KANSAS CITY ~INTERACTIVE FOUNTAINS KANSAS CITY ~STATUARY FOUNTAINS KANSAS CITY ~ROCK - BOULDER FOUNTAINS KANSAS CITY ~WATERWALLS KANSAS CITY ~DISPLAY FOUNTAINS KANSAS CITY ~WATERFALL - FOUNTAINS KANSAS CITY ~RAINBARS AND RAIN CURTAINS KANSAS CITY ~INTERIOR FOUNTAINS KANSAS CITY ~WATER FEATURE CONSTRUCTION KANSAS CITY ~WATER FEATURE DESIGN AND ENGINEERING KANSAS CITY ~CUSTOM FOUNTAIN FABRICATION KANSAS CITY -WATER FEATURE, FOUNTAIN, RAINBARS, SPRAY RINGS, FLOATING FOUNTAINS ~BAPTISMAL FONT KANSAS CITY ~ARCHITECTURAL PARKING LOT FOUNTAIN KANSAS CITY ~INFINITY EDGE FOUNTAIN KANSAS CITY ~CURRENT WATER FEATURE PROJECT KANSAS CITY ~FIRE AND WATER FOUNTAINS KANSAS CITY ~HOSPITAL FOUNTAIN KANSAS CITY ~AMUSEMENT PARK FOUNTAINS KANSAS CITY ~CORPORATE HEADQUARTERS FOUNTAINS KANSAS CITY ~POND FOUNTAIN KANSAS CITY ~RAINBARS *FEATURED ON CURB APPEAL* KANSAS CITY ~FOUNTAIN PUMPS/PARTS KANSAS CITY -LAKE MANAGEMENT KANSAS CITY -POOL CONSTRUCTION KANSAS CITY -POOL MAINTENANCE AND MANAGEMENT KANSAS CITY

Pond, garden water features, Kansas City Fountain Design Group , the Fountain Builders in Kansas City, is an innovative firm of fountain restoration Kansas City, fountain installation Kansas City, historic fountain repair Kansas City with specific skills in fountain design, pond, garden water features Kansas City, strategic and open space planning, open space master planning, urban and environmental design and community consultation with high standards of graphic and technical outputs. We pride ourselves on the development of aquascape and hardscape design ,site responsive and implementable concept, with demonstrated technical and project skills to ensure the successful translation of innovative designs to high quality constructed works. Fountain builders Kansas City, Masonry Contractors Kansas City, Landscaping pond, garden water features Kansas City and Fountain designing water falls Kansas City for nearly 30 years of experience in Kansas City Mo, St Louis MO and entire Midwest region.