There are 97 leaf tile tiles in 1 m2. The product size is 9cmx15 cmx 1cm. The back side is matt-based and serrated, the front side is glazed and glossy polished. Leaf Çini ceramic tile features are a dimension that expresses the structure as a multi-colored color with the tile tiles decorations. - Material made of ceramic material. Tiles are converted into water and cleaning materials. - Decorating the leaf tile tile for many years. Color and pattern do not exist. - Water and moisture clean thanks to the glossy glazed polished. - It does not form mold. - In places where Leaf Tile tiles are used, we breathe cool and warm in summer. - Figure the days of sound waves taking advantage of the reflective feature of the days in the regions caused by Leafy Tiles. - Kütahya tiles are against the sun, wind and exterior. - Leaf Tiles and easy to use. - Kütahya and Iznik patterned shaped tile tile models and prices are the most suitable examples. It is used between countertops in kitchens. Ceramic-based hexagons are suitable for use as wall tiles in bathrooms. Production is made in pools, flooring, pool interior flooring, design design and design. For floor tiles, it can be designed to be comprehensive in detail to floor tiles. Leaf Tile Tile Application First of all, the area to be applied should be flat, if not, it should be corrected. Thin plaster should be applied to the area. Cement-based adhesive mortar should be used as adhesive mortar. The adhesive mortar is applied to the surface to be applied regularly and evenly with a fine notched trowel. Kütahya and İznik patterned tile tiles are placed on the surface to be laid. For non-slip and a flat application, you can press on it using a spirit level or wedge. It is an important issue that the Kütahya and Iznik tiles with Ottoman and Seljuk motifs complement each other. After bonding the tile tiles to the surface, the grouting is ready for application. Normally, tiles are laid without joints. After the grouting material is prepared in accordance with the instructions, it is applied on the tile tiles. We recommend that you prefer antibacterial grouts, especially for patterned tile ceramic tiles that you will apply in your kitchens and bathrooms. After the joint application, the excess joints remaining on the tiles whose flooring has been completed are removed by wiping them with a wet sponge. Please note that international buyers are responsible for any duties/customs charges and import taxes associated with shipping to their respective countries. These fees are calculated and imposed by your country when the item arrives in the country.

There are 97 leaf tile tiles in 1 m2. The product size is 9cmx15 cmx 1cm. The back side is matt-based and serrated, the front side is glazed and glossy polished. Leaf Çini ceramic tile features are a dimension that expresses the structure as a multi-colored color with the tile tiles decorations. - Material made of ceramic material. Tiles are converted into water and cleaning materials. - Decorating the leaf tile tile for many years. Color and pattern do not exist. - Water and moisture clean thanks to the glossy glazed polished. - It does not form mold. - In places where Leaf Tile tiles are used, we breathe cool and warm in summer. - Figure the days of sound waves taking advantage of the reflective feature of the days in the regions caused by Leafy Tiles. - Kütahya tiles are against the sun, wind and exterior. - Leaf Tiles and easy to use. - Kütahya and Iznik patterned shaped tile tile models and prices are the most suitable examples. It is used between countertops in kitchens. Ceramic-based hexagons are suitable for use as wall tiles in bathrooms. Production is made in pools, flooring, pool interior flooring, design design and design. For floor tiles, it can be designed to be comprehensive in detail to floor tiles. Leaf Tile Tile Application First of all, the area to be applied should be flat, if not, it should be corrected. Thin plaster should be applied to the area. Cement-based adhesive mortar should be used as adhesive mortar. The adhesive mortar is applied to the surface to be applied regularly and evenly with a fine notched trowel. Kütahya and İznik patterned tile tiles are placed on the surface to be laid. For non-slip and a flat application, you can press on it using a spirit level or wedge. It is an important issue that the Kütahya and Iznik tiles with Ottoman and Seljuk motifs complement each other. After bonding the tile tiles to the surface, the grouting is ready for application. Normally, tiles are laid without joints. After the grouting material is prepared in accordance with the instructions, it is applied on the tile tiles. We recommend that you prefer antibacterial grouts, especially for patterned tile ceramic tiles that you will apply in your kitchens and bathrooms. After the joint application, the excess joints remaining on the tiles whose flooring has been completed are removed by wiping them with a wet sponge. Please note that international buyers are responsible for any duties/customs charges and import taxes associated with shipping to their respective countries. These fees are calculated and imposed by your country when the item arrives in the country.

There are 97 leaf tile tiles in 1 m2. The product size is 9cmx15 cmx 1cm. The back side is matt-based and serrated, the front side is glazed and glossy polished. Leaf Çini ceramic tile features are a dimension that expresses the structure as a multi-colored color with the tile tiles decorations. - Material made of ceramic material. Tiles are converted into water and cleaning materials. - Decorating the leaf tile tile for many years. Color and pattern do not exist. - Water and moisture clean thanks to the glossy glazed polished. - It does not form mold. - In places where Leaf Tile tiles are used, we breathe cool and warm in summer. - Figure the days of sound waves taking advantage of the reflective feature of the days in the regions caused by Leafy Tiles. - Kütahya tiles are against the sun, wind and exterior. - Leaf Tiles and easy to use. - Kütahya and Iznik patterned shaped tile tile models and prices are the most suitable examples. It is used between countertops in kitchens. Ceramic-based hexagons are suitable for use as wall tiles in bathrooms. Production is made in pools, flooring, pool interior flooring, design design and design. For floor tiles, it can be designed to be comprehensive in detail to floor tiles. Leaf Tile Tile Application First of all, the area to be applied should be flat, if not, it should be corrected. Thin plaster should be applied to the area. Cement-based adhesive mortar should be used as adhesive mortar. The adhesive mortar is applied to the surface to be applied regularly and evenly with a fine notched trowel. Kütahya and İznik patterned tile tiles are placed on the surface to be laid. For non-slip and a flat application, you can press on it using a spirit level or wedge. It is an important issue that the Kütahya and Iznik tiles with Ottoman and Seljuk motifs complement each other. After bonding the tile tiles to the surface, the grouting is ready for application. Normally, tiles are laid without joints. After the grouting material is prepared in accordance with the instructions, it is applied on the tile tiles. We recommend that you prefer antibacterial grouts, especially for patterned tile ceramic tiles that you will apply in your kitchens and bathrooms. After the joint application, the excess joints remaining on the tiles whose flooring has been completed are removed by wiping them with a wet sponge. Please note that international buyers are responsible for any duties/customs charges and import taxes associated with shipping to their respective countries. These fees are calculated and imposed by your country when the item arrives in the country.

The lead time of my products is between 4 and 6 weeks. Our products are handmade products, the materials we use are of the highest quality, and our delivery time is between 4 and 6 weeks after placing the order. Since our products are special and high-end products, we carefully produce and prepare your products in this process and send them to you. Production in desired color 100% Handmade Made in Turkey - Material made of ceramic material. Tiles are converted into water and cleaning materials. - Decorating the leaf tile tile for many years. Color and pattern do not exist. - Water and moisture clean thanks to the glossy glazed polished. - It does not form mold. - In places where Leaf Tile tiles are used, we breathe cool and warm in summer. - Figure the days of sound waves taking advantage of the reflective feature of the days in the regions caused by Leafy Tiles. It is used between countertops in kitchens. Ceramic-based hexagons are suitable for use as wall tiles in bathrooms. Production is made in pools, flooring, pool interior flooring, design design and design. For floor tiles, it can be designed to be comprehensive in detail to floor tiles. Leaf Tile Tile Application First of all, the area to be applied should be flat, if not, it should be corrected. Thin plaster should be applied to the area. Cement-based adhesive mortar should be used as adhesive mortar. The adhesive mortar is applied to the surface to be applied regularly and evenly with a fine notched trowel. Kütahya and İznik patterned tile tiles are placed on the surface to be laid. For non-slip and a flat application, you can press on it using a spirit level or wedge. It is an important issue that the Kütahya and Iznik tiles with Ottoman and Seljuk motifs complement each other. After bonding the tile tiles to the surface, the grouting is ready for application. Normally, tiles are laid without joints. After the grouting material is prepared in accordance with the instructions, it is applied on the tile tiles. We recommend that you prefer antibacterial grouts, especially for patterned tile ceramic tiles that you will apply in your kitchens and bathrooms. After the joint application, the excess joints remaining on the tiles whose flooring has been completed are removed by wiping them with a wet sponge. Please note that international buyers are responsible for any duties/customs charges and import taxes associated with shipping to their respective countries. These fees are calculated and imposed by your country when the item arrives in the country.

The lead time of my products is between 4 and 6 weeks. Our products are handmade products, the materials we use are of the highest quality, and our delivery time is between 4 and 6 weeks after placing the order. Since our products are special and high-end products, we carefully produce and prepare your products in this process and send them to you. Production in desired color 100% Handmade Made in Turkey - Material made of ceramic material. Tiles are converted into water and cleaning materials. - Decorating the leaf tile tile for many years. Color and pattern do not exist. - Water and moisture clean thanks to the glossy glazed polished. - It does not form mold. - In places where Leaf Tile tiles are used, we breathe cool and warm in summer. - Figure the days of sound waves taking advantage of the reflective feature of the days in the regions caused by Leafy Tiles. It is used between countertops in kitchens. Ceramic-based hexagons are suitable for use as wall tiles in bathrooms. Production is made in pools, flooring, pool interior flooring, design design and design. For floor tiles, it can be designed to be comprehensive in detail to floor tiles. Leaf Tile Tile Application First of all, the area to be applied should be flat, if not, it should be corrected. Thin plaster should be applied to the area. Cement-based adhesive mortar should be used as adhesive mortar. The adhesive mortar is applied to the surface to be applied regularly and evenly with a fine notched trowel. Kütahya and İznik patterned tile tiles are placed on the surface to be laid. For non-slip and a flat application, you can press on it using a spirit level or wedge. It is an important issue that the Kütahya and Iznik tiles with Ottoman and Seljuk motifs complement each other. After bonding the tile tiles to the surface, the grouting is ready for application. Normally, tiles are laid without joints. After the grouting material is prepared in accordance with the instructions, it is applied on the tile tiles. We recommend that you prefer antibacterial grouts, especially for patterned tile ceramic tiles that you will apply in your kitchens and bathrooms. After the joint application, the excess joints remaining on the tiles whose flooring has been completed are removed by wiping them with a wet sponge. Please note that international buyers are responsible for any duties/customs charges and import taxes associated with shipping to their respective countries. These fees are calculated and imposed by your country when the item arrives in the country.

The lead time of my products is between 4 and 6 weeks. Our products are handmade products, the materials we use are of the highest quality, and our delivery time is between 4 and 6 weeks after placing the order. Since our products are special and high-end products, we carefully produce and prepare your products in this process and send them to you. Production in desired color 100% Handmade Made in Turkey - Material made of ceramic material. Tiles are converted into water and cleaning materials. - Decorating the leaf tile tile for many years. Color and pattern do not exist. - Water and moisture clean thanks to the glossy glazed polished. - It does not form mold. - In places where Leaf Tile tiles are used, we breathe cool and warm in summer. - Figure the days of sound waves taking advantage of the reflective feature of the days in the regions caused by Leafy Tiles. It is used between countertops in kitchens. Ceramic-based hexagons are suitable for use as wall tiles in bathrooms. Production is made in pools, flooring, pool interior flooring, design design and design. For floor tiles, it can be designed to be comprehensive in detail to floor tiles. Leaf Tile Tile Application First of all, the area to be applied should be flat, if not, it should be corrected. Thin plaster should be applied to the area. Cement-based adhesive mortar should be used as adhesive mortar. The adhesive mortar is applied to the surface to be applied regularly and evenly with a fine notched trowel. Kütahya and İznik patterned tile tiles are placed on the surface to be laid. For non-slip and a flat application, you can press on it using a spirit level or wedge. It is an important issue that the Kütahya and Iznik tiles with Ottoman and Seljuk motifs complement each other. After bonding the tile tiles to the surface, the grouting is ready for application. Normally, tiles are laid without joints. After the grouting material is prepared in accordance with the instructions, it is applied on the tile tiles. We recommend that you prefer antibacterial grouts, especially for patterned tile ceramic tiles that you will apply in your kitchens and bathrooms. After the joint application, the excess joints remaining on the tiles whose flooring has been completed are removed by wiping them with a wet sponge. Please note that international buyers are responsible for any duties/customs charges and import taxes associated with shipping to their respective countries. These fees are calculated and imposed by your country when the item arrives in the country.

Clematis armandii 'Evergreen Clematis' (foreground) arches over a custom-built cedar arbor, modeled to accentuate the home's Craftsman-style architecture. Welded mild-steel panel fills create a scaffold for Akebia quinata 'Five-leaf Akebia Vine' (background), lending seasonal privacy and afternoon shade along this narrow sideyard access walkway.

Patrick Barta
Single front door - contemporary single front door idea in Seattle with a medium wood front door

Staircase - mid-sized traditional wooden straight wood railing staircase idea in New York with painted risers

Inspiration for a timeless home design remodel in Salt Lake City

Savoy House Dakota 1-light adjustable sconce in warm brass.

Example of a huge trendy metal floating open staircase design in Minneapolis

Stuart Wade, Envision Virtual Tours Mountain Reflections on Lake Burton Recently renovated both inside and out, this 5 bedroom, 5.5 bath home with sweeping views of Lake Burton is fit for entertaining large crowds. The open floor plan features a spacious great room with a 2-story stacked stone fireplace, abundant natural ligthing, dining for 10+ and a large chef's kitchen with granite countertops, custom cabinets to house every utensil, exposed beams and access to a lakeside porch. Three sets of french doors open to a magnificent curved veranda accented by columns. Western sunsets make this the place to be in the cool evenings watching the sun reflect off the jewel tone water. A private master bedroom on the main floor provides access to the covered porch. The master bath features a double vanity with granite countertops, built-in storage drawers and cabinets, jetted tub and seperate shower. Spacious guest bedrooms feature private baths and lake views. Mature landscaping including an incredible array of pink and purple rhododendron, eyebrow windows, columns and curved porches highlight the newly painted exterior. The terrace level features a second family room/rec room with a stacked stone fireplace, wet bar, and a wall of triple french doors that open to a lakeside stone terrace. Two additional guest bedrooms with full baths also have access to the terrace patio. A large laundry room and gym/art studio with outside entrance, double sink and ample storage completes the terrace level. Lake Burton is a unique Life Style. Cherry Lane is a paved street accessed by 4 single family homes. This home features a private, gated driveway off Cherry Lane. There is not a homeowner’s association, there are no fees or dues. Over 800 lake properties are managed and leased by the Georgia Power Company. Location is a major advantage for this property with close proximity to Clayton, the hospital, Waterfall Country Club, the Appalachian Trail, shopping, quaint restaurants and only about a 45 minute drive to Highlands, N.C. This house is located on deep water and has breathtaking lake and mountain views that will capture your heart! General Information: • 5 bedrooms and 5 ½ baths • All bathrooms have new updated granite counter tops. • 2 fireplaces ( 1 gas non vent logs and 1 wood burning with gas starter and built in wood storage) • Both fireplaces have raised hearths. • House has poured concrete walls with reinforced steel. • All Floor trusses were engineered for proper application. • During construction the house and grounds were pre-treated for termites. The house is inspected for termites annually. To date, no termites have been found. The termite bond is with American Pest control out of Toccoa, GA. • The main entrance has double Mahogany leaded glass door. All other exterior doors and windows are deluxe Anderson thermo pane. All Anderson windows are tilt out for easy inside cleaning. Windows have Planter shutter and/or wood blinds. • All lake side doors are 8 feet. Doors have triple locks and are adjustable for the best fit. • All exterior walls have house wrap and heavy insulation- R-17 for walls and R 30 in the attic. • House has 3 levels. Each level has its own Trane High Efficiency Weathertron heat pump XE 1200. The 2 units for the main and basement levels also have dual fuel, propane gas for extra heat if needed. • Beam Central Vacuum system for all 3 levels. • All 3 levels are wired for Stereo speakers as well as the main level outside deck. • All ceilings are 10 ft. or higher. • Bar sinks have granite counter tops *Brand new (2014) roof with HD architectural shingles has transferable lifetime warranty Entry Foyer: -Double Mahogany lead glass doors -2 lead glass side windows -Marble floor, heavy moldings, tray ceiling Great Room: -Vaulted wood ceiling with multi light chandelier -Doors can be adjusted in many different positions for easy operations -Anderson Windows and doors -All doors facing lake side are 8 ft. doors -Planter shutters in all windows on main floor Kitchen: -Vaulted ceiling with beadboard and exposed beams -Custom Gillespie cabinets with space for every utensil -Large kitchen island with breakfast bar -Walk-in pantry -Granite counter tops with plenty of prep space -Breakfast nook -Access to lakeside porch -Central Vac and crumb catcher -GE Monogram Fridge -Kitchenaid built in oven and microwave -Jen-air 4 burner gas stove with exhaust -Kitchenaid trash compactor -Scotsman Ice Machine -Over and under counter accent lighting Master Bedroom: -Heavy Molding, hardwood flooring, -Plantation shutters on bedroom French doors opening to deck -4 closets Master Bath: -Granite counter tops with double sinks -Separate shower with glass door and delta shower system -Jetted Tub -14 drawer built-in cabinets for clothing Upstairs level: -Two bedrooms, each with full baths, tile floors, double vanities, granite countertops, ample closets and linen closets Terrace Level: -Spacious family room with stone fireplace and wet bar -Guest bedroom with full bath -Office with full bath -Art studio or exercise room with double sink -Separate tool room -Laundry room/utility room with tile floors and cabinets -Covered stone terrace with access to boathouse Boat House: -Two stall for up to 25 ft. boat -2 electric boat lifts -Large deck on top of boathouse with ½ covered roof -Large storage area for boat supplies -Swim dock

Exquisite and unique, Calacatta Classique Quartz stuns with its clean whites and striking through-body veining. This showstopper countertop offers the look of luxurious marble in durable and maintenance-free quartz.

Stuart Wade, Envision Virtual Tours Mountain Reflections on Lake Burton Recently renovated both inside and out, this 5 bedroom, 5.5 bath home with sweeping views of Lake Burton is fit for entertaining large crowds. The open floor plan features a spacious great room with a 2-story stacked stone fireplace, abundant natural ligthing, dining for 10+ and a large chef's kitchen with granite countertops, custom cabinets to house every utensil, exposed beams and access to a lakeside porch. Three sets of french doors open to a magnificent curved veranda accented by columns. Western sunsets make this the place to be in the cool evenings watching the sun reflect off the jewel tone water. A private master bedroom on the main floor provides access to the covered porch. The master bath features a double vanity with granite countertops, built-in storage drawers and cabinets, jetted tub and seperate shower. Spacious guest bedrooms feature private baths and lake views. Mature landscaping including an incredible array of pink and purple rhododendron, eyebrow windows, columns and curved porches highlight the newly painted exterior. The terrace level features a second family room/rec room with a stacked stone fireplace, wet bar, and a wall of triple french doors that open to a lakeside stone terrace. Two additional guest bedrooms with full baths also have access to the terrace patio. A large laundry room and gym/art studio with outside entrance, double sink and ample storage completes the terrace level. Lake Burton is a unique Life Style. Cherry Lane is a paved street accessed by 4 single family homes. This home features a private, gated driveway off Cherry Lane. There is not a homeowner’s association, there are no fees or dues. Over 800 lake properties are managed and leased by the Georgia Power Company. Location is a major advantage for this property with close proximity to Clayton, the hospital, Waterfall Country Club, the Appalachian Trail, shopping, quaint restaurants and only about a 45 minute drive to Highlands, N.C. This house is located on deep water and has breathtaking lake and mountain views that will capture your heart! General Information: • 5 bedrooms and 5 ½ baths • All bathrooms have new updated granite counter tops. • 2 fireplaces ( 1 gas non vent logs and 1 wood burning with gas starter and built in wood storage) • Both fireplaces have raised hearths. • House has poured concrete walls with reinforced steel. • All Floor trusses were engineered for proper application. • During construction the house and grounds were pre-treated for termites. The house is inspected for termites annually. To date, no termites have been found. The termite bond is with American Pest control out of Toccoa, GA. • The main entrance has double Mahogany leaded glass door. All other exterior doors and windows are deluxe Anderson thermo pane. All Anderson windows are tilt out for easy inside cleaning. Windows have Planter shutter and/or wood blinds. • All lake side doors are 8 feet. Doors have triple locks and are adjustable for the best fit. • All exterior walls have house wrap and heavy insulation- R-17 for walls and R 30 in the attic. • House has 3 levels. Each level has its own Trane High Efficiency Weathertron heat pump XE 1200. The 2 units for the main and basement levels also have dual fuel, propane gas for extra heat if needed. • Beam Central Vacuum system for all 3 levels. • All 3 levels are wired for Stereo speakers as well as the main level outside deck. • All ceilings are 10 ft. or higher. • Bar sinks have granite counter tops *Brand new (2014) roof with HD architectural shingles has transferable lifetime warranty Entry Foyer: -Double Mahogany lead glass doors -2 lead glass side windows -Marble floor, heavy moldings, tray ceiling Great Room: -Vaulted wood ceiling with multi light chandelier -Doors can be adjusted in many different positions for easy operations -Anderson Windows and doors -All doors facing lake side are 8 ft. doors -Planter shutters in all windows on main floor Kitchen: -Vaulted ceiling with beadboard and exposed beams -Custom Gillespie cabinets with space for every utensil -Large kitchen island with breakfast bar -Walk-in pantry -Granite counter tops with plenty of prep space -Breakfast nook -Access to lakeside porch -Central Vac and crumb catcher -GE Monogram Fridge -Kitchenaid built in oven and microwave -Jen-air 4 burner gas stove with exhaust -Kitchenaid trash compactor -Scotsman Ice Machine -Over and under counter accent lighting Master Bedroom: -Heavy Molding, hardwood flooring, -Plantation shutters on bedroom French doors opening to deck -4 closets Master Bath: -Granite counter tops with double sinks -Separate shower with glass door and delta shower system -Jetted Tub -14 drawer built-in cabinets for clothing Upstairs level: -Two bedrooms, each with full baths, tile floors, double vanities, granite countertops, ample closets and linen closets Terrace Level: -Spacious family room with stone fireplace and wet bar -Guest bedroom with full bath -Office with full bath -Art studio or exercise room with double sink -Separate tool room -Laundry room/utility room with tile floors and cabinets -Covered stone terrace with access to boathouse Boat House: -Two stall for up to 25 ft. boat -2 electric boat lifts -Large deck on top of boathouse with ½ covered roof -Large storage area for boat supplies -Swim dock

Mid-sized elegant carpeted straight staircase photo in New York with carpeted risers

Reclaimed barn board desk. Liz Donnelly - Portland Photo Co.
Home office - rustic home office idea in Portland Maine

FULL HOUSE REMODEL – COMPLETE SCOPE OF WORK 1. Pre-Construction Phase • Initial site inspection and measurements • Architectural design and layout planning (if required) • Structural engineering (if load-bearing walls are modified) • Preparation of plans for city approval • Permit application and plan check • Obtain required building permits • Scheduling of inspections • Homeowner responsible for permit fees unless otherwise stated. 2. Site Preparation & Protection • Protect flooring and non-work areas • Install plastic dust barriers with zipper access • Cover windows and furniture as needed • Temporary utility setup if required • Daily job site cleanup • Final professional cleaning upon completion 3. Demolition • Remove existing flooring (tile, wood, carpet, etc.) • Remove cabinets, countertops, vanities • Remove interior walls per plans • Remove drywall where required • Remove plumbing fixtures • Remove electrical fixtures • Haul away all debris 4. Structural & Framing • Install structural beams if required • Reframe modified walls • Install new partitions per approved plans • Repair or replace damaged framing • Subfloor repair or replacement as needed • Install blocking for cabinets and accessories 5. Plumbing (Up to Code) • Replace old water supply lines (Copper Type L or PEX) • Replace or modify drain lines (ABS) • Relocate plumbing fixtures as needed • Install new shut-off valves and cleanouts • Water heater replacement if included • Call for rough and final plumbing inspections 6. Electrical (Up to Code) • Upgrade electrical panel if required • Rewire entire house as needed • Install new outlets and switches • Install GFCI/AFCI protection per code • Install recessed lighting and fixtures • Install smoke and carbon monoxide detectors • Dedicated circuits for appliances • Call for rough and final electrical inspections 7. HVAC • Replace or upgrade HVAC system if included • Install new ducting and registers • Install thermostat or mini-split system if applicable 8. Insulation • Install wall insulation per code requirements • Install ceiling insulation per code requirements 9. Drywall & Plaster • Install new drywall • Tape and mud (Level 4 or 5 finish) • Texture to match existing or smooth finish • Patch all affected areas 10. Flooring • Install tile flooring • Install engineered wood / hardwood / laminate / vinyl • Install baseboards • Floor leveling if required 11. Kitchen Remodel • Install new cabinets • Install countertops • Install backsplash • Install sink and faucet • Install appliances (owner supplied unless specified) 12. Bathroom Remodel(s) • Install new tub or shower system • Waterproofing system installation • Install tile on floors and walls • Install vanity and toilet • Install shower valve and fixtures • Install shower glass if included 13. Doors & Windows • Replace interior and entry doors • Replace windows if included • Install hardware 14. Interior & Exterior Paint • Surface preparation • Prime and paint walls, ceilings, and trim • Exterior painting if included 15. Exterior Work (If Included) • Stucco repair • Roofing repair or replacement • Concrete work or pavers • Drainage improvements 16. Final Phase • Final inspections • Punch list completion • Final cleaning • Final walk-through with homeowner Standard California Contract Terms (Summary) • All work performed in compliance with California Building Code. • Change orders must be approved in writing. • Unforeseen conditions may require additional cost. • One-year labor warranty unless otherwise stated. • Progress payments per agreed payment schedule. • Contractor is licensed and insured.

FULL HOUSE REMODEL – COMPLETE SCOPE OF WORK 1. Pre-Construction Phase • Initial site inspection and measurements • Architectural design and layout planning (if required) • Structural engineering (if load-bearing walls are modified) • Preparation of plans for city approval • Permit application and plan check • Obtain required building permits • Scheduling of inspections • Homeowner responsible for permit fees unless otherwise stated. 2. Site Preparation & Protection • Protect flooring and non-work areas • Install plastic dust barriers with zipper access • Cover windows and furniture as needed • Temporary utility setup if required • Daily job site cleanup • Final professional cleaning upon completion 3. Demolition • Remove existing flooring (tile, wood, carpet, etc.) • Remove cabinets, countertops, vanities • Remove interior walls per plans • Remove drywall where required • Remove plumbing fixtures • Remove electrical fixtures • Haul away all debris 4. Structural & Framing • Install structural beams if required • Reframe modified walls • Install new partitions per approved plans • Repair or replace damaged framing • Subfloor repair or replacement as needed • Install blocking for cabinets and accessories 5. Plumbing (Up to Code) • Replace old water supply lines (Copper Type L or PEX) • Replace or modify drain lines (ABS) • Relocate plumbing fixtures as needed • Install new shut-off valves and cleanouts • Water heater replacement if included • Call for rough and final plumbing inspections 6. Electrical (Up to Code) • Upgrade electrical panel if required • Rewire entire house as needed • Install new outlets and switches • Install GFCI/AFCI protection per code • Install recessed lighting and fixtures • Install smoke and carbon monoxide detectors • Dedicated circuits for appliances • Call for rough and final electrical inspections 7. HVAC • Replace or upgrade HVAC system if included • Install new ducting and registers • Install thermostat or mini-split system if applicable 8. Insulation • Install wall insulation per code requirements • Install ceiling insulation per code requirements 9. Drywall & Plaster • Install new drywall • Tape and mud (Level 4 or 5 finish) • Texture to match existing or smooth finish • Patch all affected areas 10. Flooring • Install tile flooring • Install engineered wood / hardwood / laminate / vinyl • Install baseboards • Floor leveling if required 11. Kitchen Remodel • Install new cabinets • Install countertops • Install backsplash • Install sink and faucet • Install appliances (owner supplied unless specified) 12. Bathroom Remodel(s) • Install new tub or shower system • Waterproofing system installation • Install tile on floors and walls • Install vanity and toilet • Install shower valve and fixtures • Install shower glass if included 13. Doors & Windows • Replace interior and entry doors • Replace windows if included • Install hardware 14. Interior & Exterior Paint • Surface preparation • Prime and paint walls, ceilings, and trim • Exterior painting if included 15. Exterior Work (If Included) • Stucco repair • Roofing repair or replacement • Concrete work or pavers • Drainage improvements 16. Final Phase • Final inspections • Punch list completion • Final cleaning • Final walk-through with homeowner Standard California Contract Terms (Summary) • All work performed in compliance with California Building Code. • Change orders must be approved in writing. • Unforeseen conditions may require additional cost. • One-year labor warranty unless otherwise stated. • Progress payments per agreed payment schedule. • Contractor is licensed and insured.