Software
Houzz Logo Print
jah1108

Retrofitting Antique cast iron tubs

14 years ago
We purchased a house that is over 100 years old and that has all the original bathroom fixtures. I fell in love with 3 of the cast iron clawfoot tubs that are in perfect condition. However, we are doing renovations in the bathrooms and the tubs faucet system are not up to modern plumbing codes and require new faucets and new overflow spill spouts. My problem is that retrofitting these tubs will leave holes from where the original spouts were located. My plumber believes that the holes cannot be filled and we must buy new tubs because any attempts to fill the holes will only result in leaks down the road. Does anyone know if it is possible to save these tubs and securely seal holes in cast iron?

Comments (9)

  • 14 years ago
    First, I would LOVE to see photos of those tubs. I bet they are amazing.

    Second, I have to believe there is some way to repair it, even if the repair is a costly one. It would seem like a huge shame to have to toss out antique claw foot tubs in otherwise perfect condition.
  • PRO
    14 years ago
    last modified: 14 years ago
    I would contact a nearby historical preservation society and ask them for suggestions on contractors. I renovated the kitchen and bathrooms in a hundred year old Bethlehem PA home and had no idea who to hire since I live and work in Dallas. The Historical Society connected me with an incredible contractor that the historical Preservation Society used to renovate churches and other buildings from the mid 1700's. Due to their vast experience working on very old buildings they had great ideas, great connections with inspectors, and incredible expertise. They hired Mennonites to do the stone work since they were the only masons who still did it the same way it was done a hundred years ago. The project took 9 months and came out flawless. One phone call made my life so much easier.
  • PRO
    14 years ago
    Forgot to mention, we kept all the original bathroom fixtures claw foot and built in tubs without making additional holes in them even the faucets were reused. The original subway wall tiles and original marble herringbone floor tiles were all preserved.
  • 14 years ago
    Thank you for all the comments. Melinda, that is an excellent idea about visiting the historical society for a contractor. I only wish I had thought of that sooner. We have already selected our general contractor and he is not as familiar with historical homes as I would have liked. I think I will still get in touch with the historical society though to see if they have any resources or recommendations for a tub re-finisher person. I will also try and post pictures of the tubs once I have the chance. We are not currently living in the home!
  • PRO
    14 years ago
    I have seen plates made for that purpose; use silicone waterfproof sealer. You can also purchase a gooseneck faucet and attach it in the same place; the gooseneck should raise the faucet to the legal height. There is a place in Lake County CA called the :Elegant Bowl" which specializes in antique plumbing if you cannot find it elsewhere. Good luck; would love to see finished photos!
  • PRO
    14 years ago
    Wonderful news.
  • 10 years ago

    Would LOVE to see the finished products!

  • 10 years ago
    I HAVE BEEN TRYING TO RETROFIT OUR TUB... JUST LIKE THIS! (Your fixtures are in much better condition!). PLEASE submit an updated pic of what they did to complete the tub on the right!
Sponsored
Industry Leading Kitchen & Bath Remodelers in Franklin County, Ohio