Mounting version - Island Mounted
860 CFM centrifugal blower
Three-speed mechanical, soft-touch push button control panel
Four 35W halogen lights (Type: GU-10)
Aluminum multi-layers micro-cell dishwasher-friendly grease filter(s)
Machine crafted stainless steel (brushed finish)
6" round duct vent exhaust and back draft damper
Convertible to duct-free operation (requires optional charcoal filter)
Telescopic flue accommodates 8ft to 9ft ceilings (optional flue extension available for up to 10ft ceiling)
Dimension: 36x35(w x d)
Chimney Height: Telescopic Chimney Fits Up to 9ft ceiling. 6" round duct vent
Airflow at Max: 860 CFM Centrifugal blower
Lighting: 4x35 w Halogen Lights Dimmable
Noise Level: Low speed: 25 dba (0.4sones) to Max speed: 56dba (7.0 sones)
Voltage: 120v @ 60 Hz standard USA & CANADA
Motor: Dual Chamber/ Dual Centrifugal/Sirocco
MountType: Island Mount
Speeds: 3 Speeds
Keypad type: Soft Touch Push Button
Filters: Dishwasher safe aluminum 6-layer grease filters
Material: Brushed Stanless Steel
Warranty: 1 year parts from the Manufacturer
Features: Radio Frequency Interference Protected

Attached is the diagram

This one is a top contender for my remodel. I was looking for a 650CFM. this is a bit more.

My ceiling is 15 feet. with the chimney extending to 8 ft and the added flue extension of 10 feet, can the access be trimmed to fit, or will this diminish the integrity of the hood? Is there any additional hardware required for installing the extension.

What is 7 sones comparable to?. i.e., 2 sones sounds like the humming of a refrigerator.

Has anyone installed this hood? Feedback?

Hello,

This unit goes from an 8-9 ft. ceiling. The extension will extend it up an additional foot for a 10 ft. ceiling so unfortunately if you have a 15ft. ceiling this will not be long enough.