Software
Houzz Logo Print
matthewg864

Briggs 20 hp will not start

17 years ago

20 HP Briggs Diamond I/C model 460707 2278-E1 Opposed Twin engine. Ok, this thing has me completely stumped. It was given to me with a thrown rod which has been repaired along with a new oil-slinger. Engine is getting plenty of gas, has great compression, new plugs, new coil, and the timing has been set per Briggs Repair Manual but it still will not start. It will turn over fine, at least until the battery wears down, but will not attempt to fire even when starting fluid is sprayed into the carb. All kills have been disconnected from the engine as well. For reference : I timed the engine per specs with #1 cylinder TDC turned the camshaft to proper position then slid the timing gear on the crankshaft. Everything mates fine. The strange thing is, the camshaft has 3 line marks on it about 120 degrees apart but only one has the dimple next to it, this is the one I lined the crank with. What am I missing? I am at wit's end and ready to apply gas and a match. What could be wrong with this engine? Please someone, HELP!!

Comments (3)

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Franklin County's Reliable Landscape Design & Contracting